INSTALLATION
MOUNTING THE RANGEHOOD
1.This range hood is mounted under a kitchen cabinet unit.
2.Select preferred duct location on rear or top of unit. (See page 6 & 7 for ducting conversion options)
3.Begin installation by temporarily removing the baffle filters.
4.Reinforce cabinet base with 1x2 wood strips if additional strengthening is required.
5.Temporarily position the range hood in the desired mounting location. Measure and mark the mounting holes,
duct and electrical access locations with
a pencil.
6.Drill/cut out the required openings for
duct and electrical access; make sure the duct opening is large enough to apply duct tape.
7. Fasten hood onto cabinet with screws and washers provided.
8. Install electrical.
9. Install duct work and
10. Reinstall the baffle filters. 11. Power up hood and check for leaks 
around
6
6.Duct opening cutout
duct/silver tape
4.Add 1x2 wood strips
3.Baffle filters
