INTRODUCTION

One (1) FireStore FS-2/2E unit with attached rack mounting ears

One (1) 120GB IDE disk drive in caddy

One (1) 6-pin to 6-pin FireWire cable (for External Drive connection)

One (1) 6-pin to 6-pin FireWire cable (for front panel port loop)

One (1) User Guide

One (1) Focus Enhancement's Warranty Card and Statement

One (1) Focus Enhancement's FireStore DV Conversion Suite Demo Disk

If any of these menus are missing, contact Focus Enhancements or your FireStore dealer/distributor immediately.

You may need to purchase cables to connect more than one hard disk drive to the FS-2/2E at a time. Your Focus Enhancements dealer can help you identify additional cables you may need.

Installation and

Site Requirements

Focus Enhancements recommends that FS-2/2E units be installed in a restricted access area, such as an equipment room or closet and the installation be performed by trained installers.

The units are designed and tested to operate reliably between +5 - +40C (41 - 104 F).

To maintain this range, consider the following:

Air temperature surrounding the equipment must remain within the specified range.

Air flow around the equipment must be sufficient to maintain proper operating temperatures

If in doubt about the site temperature, take measurements to be certain. If measured temperatures fall outside the defined ambient temperature range, you must bring the temperature within the defined range.

Storage temperature for the units must remain between -20 - +60C (-4 - 140 F).

Mounting in a 19” Electronics Rack

The FS-2/2E measures 15.89” high x 17.36” wide by 3.47” deep. It is an 2RU chassis featuring front rack mount ears to be installed into a standard 19” audio/visual rack. There must be room behind the unit for the attachment of cables.

To mount the FS-2/2E in a standard 19” audio/ visual rack, do the following:

STEP 1: Determine the desired location. The FS-2/2E requires 3.47 vertical inches of rack space.

To prevent overheating, the FS-2/2E requires a minimum of 1.75 vertical inches of space above and below the unit.

STEP 2: The FS-2/2E includes a pair of universal mounting ears on the front sides of the unit that support standard 19” audio/visual racks. Using the provided hardware, mount the FS-2/2E securely in the rack.

Screws

Screws

STEP 3: Connect the FS-2/2E unit to the wall current using the attached power cord.

Inserting the Internal 3.5” IDE Drive

Insert the internal 3.5” IDE drive as follows:

STEP 1: Remove the drive from its packaging.

STEP 2: Slide the drive carefully into the bay until it is seated firmly.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

1 - 3

Part Number: MANL-0927-03

Page 14
Image 14
FOCUS Enhancements FS-2/2E manual Installation Site Requirements, Mounting in a 19 Electronics Rack

FS-2/2E specifications

FOCUS Enhancements FS-2/2E is a comprehensive video monitoring and recording solution designed for professionals in the broadcast and production industries. This advanced device serves as both a video converter and a monitoring tool, providing users with the flexibility and functionality needed for high-quality video workflows.

One of the standout features of the FS-2/2E is its ability to handle a wide range of video formats and resolutions. Supporting both SD and HD formats, including 1080i and 720p, the FS-2/2E ensures compatibility with various production environments. Additionally, it supports multiple input sources, including composite, component, and SDI connections, allowing for seamless integration with different video equipment.

The FS-2 model comes equipped with a powerful processing engine, which provides real-time up-conversion and down-conversion capabilities. This technology is crucial for ensuring that video content maintains the highest quality regardless of the output format or equipment used. The FS-2E variant further enhances this functionality, offering additional features tailored for more specialized applications.

One of the key characteristics of the FS-2/2E is its robust frame-rate conversion. This feature is indispensable when dealing with projects that require a smooth and consistent playback experience across varying source formats. The unit can automatically adjust frame rates, significantly enhancing the viewing experience while minimizing artifacts commonly associated with conversion processes.

In addition to these technical capabilities, the FS-2/2E also boasts a user-friendly interface. Its intuitive controls allow operators to easily navigate settings and adjustments, making it accessible for both seasoned professionals and newcomers to the industry. This ease of use is complemented by comprehensive monitoring options, including waveform and vector scope displays, which provide vital feedback for video quality management.

Another noteworthy aspect of the FS-2/2E is its rugged and portable design. Built to withstand the demands of on-location production, the unit is compact yet durable, making it an ideal companion for video professionals working in the field. With its combination of high functionality, versatile format support, and user-centered design, the FOCUS Enhancements FS-2/2E continues to be a valuable asset for anyone involved in video production and broadcasting.