FOCUS Enhancements FS-2/2E manual Timecode or User Bit Value, Current Disk Volume, Folder Display

FS-2/2E FUNCTIONS

NOTE: The FS-2/2E will not accept NDF TC values in DF TC mode.

AUDIOMETER - Displays left and right levels in db. The scale indicates -10db, -4db, and 0db. This display mode is only available for the FS-2E, or the FS- 2 (with the 2.0 upgrade).

The 2 lines on the menu appear similar to the following:

-10 -4 0

R------------------

L-----------------

(7) Timecode or User Bit Value

Displays the timecode or user bit value of display mode selected as follows:

00;00;00;00 - Drop Frame 00:00:00:00 - Non Drop Frame

(8) Current Disk Volume

Displays the current disk volume in relation to available space.

(9) Available Space on Volume

Displays the space in time available on the current volume, for example,

DISK 1 183min - Current Disk time remaining is 183 minutes

NO DISK - No attached Disk

(10) Folder Display

In record or playback, this displays the particular folder a clip is in (if applicable). If playing an entire folder (PLAY FROM menu set to particular folder), it displays the folder name as follows: [FOLDER].

(11) Soft Key One (MENU) Function Display

Displays the current function related to Soft Key one (left key on the top row of buttons). You can use this key for opening the FS-2/2E Menu and also as a STOP key during a recording.

(12) Soft Key Two (DISP) Function Display

Displays current function of Soft Key two (middle key on the top row of buttons). This changes the TC display between COUNTER, REMAINING, DV TC (NTSC or PAL), USER BIT, and ABSOLUTE when in record or playback modes. For the FS-2E, or the FS-2 with the 2.0 upgrade, there is an additional AUDIOMETER display mode.

(13) Soft Key Three (SHFT) Function Display

Displays current function of Soft Key three (right key on the top row of buttons).

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 6

Part Number: MANL-0927-03