FOCUS Enhancements manual User/Password, View Ip Info, Services, FS-2/2EFUNCTIONS

Models: FS-2/2E

1 71
Download 71 pages 30.77 Kb
Page 49
Image 49
USER/PASSWORD

FS-2/2E FUNCTIONS

Press the EXIT button to take you back to the SETUP menu.

USER/PASSWORD

This screen allows you to set a username and password for the FS-2/2E. If you are unsure what username and password to use, contact your system administrator.

USER:FS2

PASWD:FOCUS

EXIT

SAVE

NEXT

To modify the username and password, use the following steps:

STEP 1:

Select the item to modify and then

 

press the right arrow key to select the

 

field.

 

 

STEP 2:

Use

to increase the value (HINT:

 

press the SHIFT key on the FS-2/2E

 

front

panel plus

to decrease a

 

value).

 

VIEW IP INFO

In cases where DHCP is being used, by selecting VIEW IP INFO, you can see the IP address that the network has provided the FS-2/2E.

IP100.000 001.000

MSK255.000 000.000

DHCP DISABLED

NOT CONNECTED NEXT

If the FS-2/2E is not connected to a network or was not able to successfully log on, this screen displays “DHCP DISABLED NOT CONNECTED”. Check your settings or contact your system administrator for further assistance.

SERVICES

The SERVICES menu allows you to enable or disable any of these services: FTP, TELNET, or WEB connection. With each, it is necessary to enable or disable the function within the submenu.

Values loop back to zero once the maximum value has been entered.

STEP 3: To modify the next item, press the NEXT key on the FS-2/2E front panel. It is only possible to have one username and password per unit. The maximum number of characters for each is seven.

FTP

TELNET

WEB

EXITSEL

Once FTP is enabled you can use your web browser or ftp utility to transfer file to and from the FS-2/2E.

With TELNET enabled, you can send commands to control the FS-2/2E with a telnet utility.

With WEB enabled, you can control the FS-2/2E from your web browser. Type in the FS-2/2E IP address into the address bar of your browser to start using the web interface. Only an FS-2E or FS- 2 (with the 2.0 firmware upgrade) has this option available.

Use the web interface to control, change settings, edit playlists, and even delete tracks on the FS-2/2E.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 28

Part Number: MANL-0927-03

Page 49
Image 49
FOCUS Enhancements manual User/Password, View Ip Info, Services, FS-2/2EFUNCTIONS