FOCUS Enhancements manual Edit/Utility/Input Buttons, FS-2/2EFUNCTIONS, Edit Function Keys

FS-2/2E FUNCTIONS

CHAPTER 2

FS-2/2E FUNCTIONS

This chapter contains the following sections: Edit/Utility/Input Buttons

LCD Menu Soft Keys

Transport Control Keys LCD Display

FS-2/2E Menus and Functions

Edit/Utility/Input Buttons

To the right of the hard disk drive are a bank of 15 buttons as shown below.

MARK IN	MARK	PLAY	KEEPER	FOLDER
	OUT	LIST
OSD	HDD	LOCK	REMOTE	E-E
CMPST	Y/C	CMPNT	SDI	DV

The first row contains five buttons that are Edit functions keys.

The second row consists of five buttons that are Utility keys.

The third row has five buttons that are Input buttons.

Edit Function Keys

This section explains the edit function keys.

MARK	MARK	PLAY	KEEPER	FOLDER
IN	OUT	LIST

MARK IN - Mark In Key

Use the MARK IN key to mark a particular frame as a starting point when creating a clip for a playlist. Refer to “Playlist Menu” on page 2-15 of this user guide for more information about Playlists.

NOTE: It is only possible to mark in and out points during playback.

MARK OUT - Mark Out Key

Use the MARK OUT key to mark a particular frame as an ending point when creating a clip for a playlist.

NOTE: Once you have selected In and Out points, press the PLAYLIST key. (The In and Out key lights will turn off). You are then free to add more clips to the playlist by again selecting In and Out points. When finished, go to the PLAYLIST menu under

SETUP.

PLAYLIST – Add to Playlist key

Press this key during stop or play to add a current clip to the playlist.

Once In and Out points have been selected, press this key to add selected clips to the playlist.

KEEPER - Keeper Key

By pressing the Keeper key during a recording, you can mark each clip into the KEEPER folder on disk.

To add all KEEPER clips to the KEEPER folder on the disk drive, select UTILITIES->ORGANIZE CLIP from the FS-2/2E menu.

FOLDER - Folder Key

By pressing the Folder key during a recording, you can mark each clip into particular pre-named folders on disk (up to 10 folders can be prenamed). Default names for the folders are 0 through 9. Refer to “How to Mark Scenes” on page 3-7 of this user guide to set up Scene Marking folders).

By repeatedly pressing the FOLDER key, you can scroll though the available folders. You can also assign clips to folders using the numeric keypad on the optional remote control units. The current clip can be marked during recording, playback or in stop mode. Once selected, the clip is marked for placement into that particular folder.

To add all marked clips to their respective folders on the disk drive, select UTILITIES -> ORGANIZE CLIP from the FS-2/2E menu.

For more information on SCENE MARKING, refer to “How to Mark Scenes” on page 3-7 of this user guide.

If the FOLDER key is lit during playback, the FS-2/2E PLAY FROM mode is set to FOLDER.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

2 - 1

Part Number: MANL-0927-03