FOCUS Enhancements manual How to Mark Scenes, Using the FS-2/2E

Using the FS-2/2E

How to Mark Scenes

The FS-2/2E Scene Marking feature allows you to mark clips for placement in particular folders during recording, playback or stop mode.

When a drive is formatted using FireStore, ten folders are created numbered 0 through 9. After the drive is formatted on FireStore, you can connect the hard-disk drive to a computer and give each of these folders a custom name (if you need help mounting your FireWire hard-disk drive to your computer system, refer to “How to Put Recorded Clips on a Computer System” on page 2-2. To rename each folder, click on the folder name until it is highlighted, then type in the desired name of the folder.

NOTE: Folder names cannot exceed eleven characters.

Folders are ordered on FireStore in numerical followed by alphabetical order. For instance, if folders are named “Scene 1”, “Scene 2” and “Auditions”, they appear on FireStore as “1 Auditions”, “2 Scene 1” and 2 Scene 2”. The folder number is added in front of the folder name on the FS-2/2E LCD display for easy identification when using the optional remote control commander keypads.

To create a custom order to Folders, Focus Enhancements recommended that you change the name to change the numerical/alphabetical order.

For example place numbers at the beginning of the folder name to determine the key to folder assignments.

After you have selected your “mark to” folder, you are almost ready to mark your scenes. Before you can start marking, you must select the playlist that will contain your scenes. To do this, use the following steps:

STEP 1: Press the PLAYLIST button to bring up the playlist menu.

STEP 2: Select either OPEN, to choose an existing playlist, or NEW, to create a new one.

STEP 3: Exit the PLAYLIST menu by pressing the MENU button

Now you are ready to mark your scenes. Use the following procedure:

STEP 1: Play your pre-recorded clip from the FS-2/2E.

STEP 2: When you encounter the start of your scene, pause the FS-2/2E and then press the MARK IN button. The MARK IN button should light up.

STEP 3: Play your clip again to the end point and pause.

STEP 4: Press MARK OUT. The MARK OUT button lights.

STEP 5: Press the PLAYLIST button to save the marked scene.

STEP 6: Mark the rest of your scenes using the same procedure.

STEP 7: When you have completed marking your scenes, you must save the playlist to disk. Stop the playback on the FS-2/2E and press PLAYLIST.

STEP 8: Select the SAVE menu option, enter the playlist name.

STEP 9: Press NEXT, and then press YES to confirm your request to save the playlist. The playlists are saved in the PLAYLIST folder on your hard drive.

Advanced users can delete or change the order of scenes using the PLAYLIST->EDIT menu options. For FS-2E users, or FS-2 (with 2.0 upgrade), you can also use the web interface (shown below) to edit the current playlist. Use your browser to connect to the FS-2E, and select the PLAYLIST tab.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

3 - 7

Part Number: MANL-0927-03