FOCUS Enhancements FS-2/2E manual Replacing the Power Module Fuse, Introduction

INTRODUCTION

STEP 4:	Scroll from value to value using the
	FORWARD	and BACK INDEX
	Buttons.
STEP 5:	Press and	to scroll through digits
	in the value.
STEP 6:	Press EXIT to return to the menu
	screen.
	Regardless of the display, the file
	name always remains YYYYMMDD-
	HHMMSS.xxx	(Year-Month-Date-

Hour-Minute-Second).

Replacing the Power Module Fuse

The power module of the FS-2/2E contains a protective fuse.

To replace the fuse do the following: STEP 1: Turn off the FS-2/2E.

STEP 2: Locate the power module on the rear of the unit. It is indicated as “AC In.”

STEP 3: Detach the power cord from the power module.

STEP 4: Locate the small recess on the top of the power module above the power switch.

STEP 5: Use a small tipped standard screwdriver to pop open the fuse door.

STEP 6: Once open, slide the white fuse carrier out of the unit.

STEP 7: Replace the fuse with a 1.6 amp 250V slow blow fuse.

STEP 8: Reassemble the fuse carrier and slide it back into the unit.

STEP 9: Replace the fuse box door.

STEP 10: Re-attach the power cord.

FS-2 and FS-2E Studio DTE Disk Recorders User Guide

1 - 10

Part Number: MANL-0927-03