Olevia LT42HVi Connecting to a VCR, Disconnect all power sources before making any connections

Models: LT42HVi

1 97
Download 97 pages 42.57 Kb
Page 23
Image 23

TV Installation and Connection Guide

Connecting to a VCR

Disconnect all power sources before making any connections.

Use this hookup if you subscribe to a cable TV system that does not require a cable box.

1.Using A/V cable and S-Video cables, connect the VCR's Audio and S Video OUT jacks to the TV's Audio and S-Video In jacks.

Rear of TV

VIDEO-2 VIDEO-1

VCR

Yellow

 

White

 

Red

S Video cable

ANT

A/V cable with RCAconnector

When Connecting both Video IN or S-Video IN

Note: When you connect video equipment to both the same Video and S-Video input jacks, display will automatically select S-Video first.

To view Video signal, please disconnect the S-Video jack or turn off the S-Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it. S-Video input has a better quality of picture than a composite Video signal.

Note: You can also use the Video 2 jacks located on the TV rear, or Video 3 located on the right side of the display to connect additional video equipment.

21

Page 23
Image 23
Olevia LT42HVi manual Connecting to a VCR, Disconnect all power sources before making any connections