2.Push the top grille straight up, then pull straight out. Lay the grille on a soft surface.

BAB

A. Top grille

B. Cabinet side trims

To Replace Top Grille:

1.Insert top grille hooks (located on the back of the top grille) onto mounting bolts on the side trim.

2.Pull grille down slightly to lock into place.

Turn Power On or Off:

1.Remove top grille.

2.Press power switch to the On or Off position.

3.Replace top grille.

IMPORTANT: Be sure the power switch is set to the On position after cleaning refrigerator or changing light bulbs.

A

Water Pressure

A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, see “Troubleshooting” or call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 psi (276 kPa).

If the water pressure to the reverse osmosis system is less than

40 psi (276 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Water System Preparation

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Turn off the ice maker. Slide the ice maker On/Off control, located on the left-hand side of the ice bin, to the OFF (down) position as shown.

A. Power switch

Water Supply Requirements

Read all directions before you begin.

IMPORTANT:

When your refrigerator was installed, the water connection from the water source should have been connected to your refrigerator. If your refrigerator is not connected to a water source, see “Connect to Water Line” in the Installation Instructions. If you have any questions about your water connection, see “Troubleshooting” or call a licensed, qualified plumber.

If you turn the refrigerator on before the water line is connected, turn the ice maker OFF. See “Ice Maker and Storage Bin.”

All installations must meet local plumbing code requirements.

A

A. On/Off control

NOTE: If your model has a base grille filter system, make sure the base grille filter is properly installed.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

2.Turn on the ice maker. Slide the ice maker On/Off control, located on the left-hand side of the ice bin, to the ON (up) position. Please refer to “Ice Maker and Storage Bin” for further instructions on the operation of your ice maker.

Allow 24 hours to produce the first batch of ice.

Discard the first three batches of ice produced.

5

Page 5
Image 5
Jenn-Air W10183787A manual Water System Preparation, Water Supply Requirements

W10183787A specifications

The Jenn-Air W10183787A is a sophisticated and stylish built-in electric cooktop that exemplifies both culinary excellence and innovative design. As a part of the Jenn-Air brand, which is known for its premium kitchen appliances, this cooktop offers exceptional performance to elevate your cooking experience.

One of the main features of the Jenn-Air W10183787A is its smooth glass-ceramic surface which not only looks sleek but also is easy to clean. The surface resists scratches and stains, ensuring that your cooktop maintains its pristine appearance over time. This cooktop is designed to accommodate various cooking styles and techniques, featuring multiple heating elements to provide optimal cooking flexibility.

The cooktop includes powerful induction cooking technology, which utilizes magnets to directly heat pots and pans rather than the cooktop surface itself. This leads to faster cooking times, precise temperature control, and increased energy efficiency, making it not only a sustainable choice but also a practical one for busy kitchens. Induction cooking is particularly beneficial as it allows for quick adjustments to heat settings, providing professional-level cooking performance.

Moreover, the Jenn-Air W10183787A incorporates advanced features such as touch controls and a digital display that simplifies operation and enhances user experience. These controls allow for seamless and intuitive navigation through various cooking options. The cooktop also features a bridge element, enabling the connection of two burners for larger cookware, which is ideal for warming or preparing meals in bigger pots or pans.

In terms of safety, this cooktop is equipped with a hot surface indicator that illuminates when the cooking surface is still hot, preventing accidental burns. Additionally, the cooktop offers a child lock feature, ensuring that safety is prioritized in homes with young children.

Overall, the Jenn-Air W10183787A built-in electric cooktop stands out for its blend of cutting-edge technology, design elegance, and high performance. By choosing this cooktop, home chefs can enjoy a high level of functionality and control that enhances their culinary creations. Whether you are a novice cook or an experienced chef, the Jenn-Air W10183787A is designed to inspire creativity and ensure exceptional cooking results in every dish prepared.