3.Insert the ³⁄₈" socket and extension into the hole and use the ratchet handle to loosen the nut half of a rotation. Repeat this process for each of the 4 nuts.
4.With the nuts loosened, the blower exhaust scroll can be easily rotated downward.
4.Verify the “Top” label is positioned as shown.
5.Retighten each nut with the ³⁄₈" socket, extension and ratchet.
6.Reinstall the 4 plastic plugs.
To rotate blower motor:
NOTE: The “Top” label location on the blower motor is at the 9 o’clock position.
1.Using a ratchet with a ³⁄₈" socket and supporting the motor with one hand, remove the 4 machine nuts that attach the blower motor to the exhaust scroll.
2.Remove the blower motor and wheel assembly from the weld studs.
D
A
B 
C | E |
A. Top label | D. Weld stud location |
B. Blower motor | E. Blower wheel |
C. Motor mounting plate
3.When the motor mounting plate clears the threaded weld studs, rotate the assembly clockwise 90° and reinstall the four
A 
A. Top label
5.Follow steps 5 - 10 in the “Install Cooktop” section.
Make Gas Connection
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
1.Apply
2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.
3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.
10
