8.Turn the control knob to LO and using a butane extension lighter, light the burner.

9.Remove the control knob.

10.Use a ¹⁄₈" x 4¼" flat-blade screwdriver to adjust the flame height. Tighten screw to reduce flame height. Loosen screw to increase flame height.

NOTE: When you are converting to LP gas, the screw should be tightened down completely.

AB

A. Single flame burner adjustment screw (on right side of valve) B. Dual flame burner adjustment screw (on left side of valve)

11.When finished adjusting the flame height, put a control knob back onto the valve stem and turn off the burner.

12.Remove the control knob.

13.Replace the round gasket.

14.Repeat steps 6 through 13 for any other burners that need adjustment.

15.Lift up on the control console and set it back into place. For a proper fit, the flange of the control console must hook over the lip on the front of the range cooktop.

A

B

A. Control console flange

B. Front lip of range cooktop

16.Check that the control console is flush with the top edge of the range.

A

A. Flush with range top

17.Replace the 2 screws on each side of the control console.

18.Replace the control knobs.

19.Replace burner grates.

20.Test the flame by turning the control from LO to HI, checking the flame at each setting.

Reinstall Kick Plate

1.Align shoulder screw mounting holes with shoulder screws on range.

2.Push kick plate down against front of range until the top screw holes are aligned with the mounting holes on the front of the range.

3.Reattach screws to the top of the kick plate.

B

C

A

D

A. Kick plate

B. Reattach these screws.

C. Top screw hole

D. Shoulder screw mounting hole

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.For oven use and cleaning, read the Use and Care Guide.

Check Operation of Oven Bake Burner(s)

1.Remove the oven racks and bake burner cover and set them aside on a covered surface.

2.Start a Bake cycle. See the Use and Care Guide for operating instructions.

The oven bake burner should light within 8 seconds. Under certain conditions it may take the burner up to 60 seconds to light.

Electronic igniters are used to light the bake burners.

NOTE: No adjustments can be made to the bake flames.

Check Operation of Oven Broil Burner

1.Remove the oven racks and set them aside on a covered surface.

2.Start a Broil cycle. See the Use and Care Guide for operating instructions.

The oven broil burner should light within 8 seconds. Under certain conditions it may take the burner up to 60 seconds to light.

Electronic igniters are used to light the broil burner.

NOTE: No adjustments can be made to the broil flames.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your range.

12

Page 12
Image 12
Jenn-Air W10323791 Reinstall Kick Plate, Complete Installation, Check Operation of Oven Bake Burners

W10323791 specifications

The Jenn-Air W10323791 is a premium appliance part designed for select models of Jenn-Air refrigerators, particularly optimized for maintaining efficient cooling and temperature management. As a replacement part, the W10323791 offers exceptional reliability, aligning with the brand's reputation for high-quality kitchen appliances.

One of the main features of the W10323791 is its ability to regulate temperature effectively within the refrigerator. It plays a crucial role in ensuring that food items remain fresh for longer periods by maintaining consistent cooling. This component acts as a thermostat, enabling precise temperature control, which is vital for preserving the quality of perishable goods. With the W10323791, households can rest assured that their refrigeration system is operating at optimal performance, thanks to its durable construction and advanced capabilities.

Another notable characteristic of the W10323791 is its compatibility with various Jenn-Air refrigerator models. This versatility makes it easier for users to find a replacement that fits their specific appliance, ensuring a seamless integration into existing systems. The part is designed for straightforward installation, allowing homeowners to replace it without requiring professional help, thus saving both time and money.

In terms of technology, the W10323791 incorporates advanced materials that enhance its longevity and resistance to wear and tear. The component undergoes rigorous testing to meet the high standards set by Jenn-Air, making it a trusted choice for consumers seeking dependable appliance parts. Moreover, its energy-efficient design contributes to lower utility bills, aligning with today's emphasis on sustainability and cost-effective living.

In summary, the Jenn-Air W10323791 is a key component that underscores the brand's commitment to quality and innovation. With its focus on temperature control, compatibility, and durability, the W10323791 ensures that your Jenn-Air refrigerator operates efficiently, delivering fresh food and preserving culinary delights. Whether you are replacing a worn-out part or enhancing your kitchen's functionality, the W10323791 stands out as an essential part of a modern kitchen. It embodies the integration of advanced technology with user-friendly design, making it an excellent choice for any Jenn-Air refrigerator owner.