Side Trim

³⁄₈" (9.7 mm)

¹⁄₁₆" (1.5 mm)

³⁄₃₂" (2.38 mm)

³⁄₁₆"

(4.5 mm)

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Inset Installation Dimensions

1.Measure the distance from point A (as shown) to the back wall. Add ¹⁄₃₂" (0.8 mm) to this measurement to allow the side panel to fit into the trim.

2.If the panel is more than ³⁄₈" (9.5 mm) thick, route the front edge to allow the side panel to fit into the trim.

A

Recessed Inset Installation Dimensions

1.Measure the distance from point A (as shown) to back wall.

2.Route the front edge of the support board or attach a ³⁄₈" (9.5 mm) board to hold the panel in the cabinet side trim.

A

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT:

■Do not remove the film covering until the refrigerator is in its operating location.

■All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

■Keep the cardboard shipping piece or plywood under the refrigerator until it is installed in the operating location.

1.Remove and save the literature package bag taped to the side of the refrigerator and the parts bag behind the grille. Remove the four brackets (two on each side) that attach the shipping base to the refrigerator bottom.

NOTE: Do not remove tape and door bracing until the refrigerator is in its final location.

2.If necessary, reduce the tipping radius. See “Tipping Radius” for ceiling height requirements or “Reduce Tipping Radius” for step-by-step instructions. If you do not need to reduce the tipping radius, proceed to “Move the Refrigerator into House.”

Reduce Tipping Radius

(if required)

Before bringing the refrigerator into the home, be sure there is adequate ceiling height to stand the refrigerator upright. See “Tipping Radius” in the “Installation Requirements” section for more information.

If you do not have adequate ceiling height to stand the refrigerator upright, the tipping radius can be reduced by removing the top grille and side trims (see the following chart).

Model Reduced Tipping Radius

4288¹⁄₂" (224.8 cm)

4889¹⁄₄" (226.7 cm)

1.Grasp both ends of the top grille.

16

Page 15 Page 17
Page 16
Image 16
Jenn-Air W10379134A manual Unpack the Refrigerator, Reduce Tipping Radius, Model Reduced Tipping Radius
Page 15 Page 17

W10379134A specifications

The Jenn-Air W10379134A is a high-performance kitchen appliance that exemplifies innovation and quality in home cooking. Designed for the discerning chef, it combines advanced technologies with stylish aesthetics, making it a standout choice for modern kitchens.

One of the primary features of the W10379134A is its versatile cooking capabilities. This appliance supports various cooking methods, allowing users to bake, broil, and roast with precision. Its multi-functionality caters to a wide array of culinary techniques, ensuring that home cooks can experiment and perfect their recipes.

The appliance includes a powerful convection fan that ensures even heat distribution throughout the cooking space. This technology is vital for achieving consistent cooking results, whether baking a delicate soufflé or roasting a whole chicken. With the convection feature, the Jenn-Air W10379134A enhances efficiency, significantly reducing cooking times while preserving moisture and flavor in foods.

Another significant characteristic of the Jenn-Air W10379134A is its intuitive control panel, which provides users with an easy interface. The digital display is user-friendly, allowing cooks to select from various temperature settings and cooking options with minimal effort. Furthermore, the appliance is designed with pre-programmed settings that simplify many cooking tasks, making it approachable for cooks of all experience levels.

In terms of design, the Jenn-Air W10379134A boasts a sleek, modern aesthetic that seamlessly integrates into any kitchen decor. Available in stainless steel or other finishes, its elegant look enhances the overall visual appeal of the kitchen. The quality of materials used ensures durability and longevity, making it a worthwhile investment for homeowners.

Safety is also paramount with the Jenn-Air W10379134A. It is equipped with features such as a temperature probe and automatic shut-off functions, which provide peace of mind during cooking. These safety mechanisms help prevent overcooking and promote energy efficiency, which is essential in today’s eco-conscious world.

In conclusion, the Jenn-Air W10379134A emerges as a powerful, versatile, and stylish addition to any kitchen. With its advanced features, user-friendly interface, and elegant design, it meets the needs of both seasoned chefs and novice cooks alike, promoting culinary creativity while ensuring optimal cooking results.
Top Page Image Contents