2.Push the top grille straight up; then pull straight out. Lay the grille on a soft surface.

BAB

A. Top grille

B. Cabinet side trim

3.Remove the six screws attaching each cabinet side trim to the refrigerator and remove the side trims.

Move the Refrigerator into House

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

1.Place an appliance dolly under the left side of the refrigerator as shown. Place the corner posts from the packing materials over the trims and handles as appropriate to avoid damage. Slowly tighten the strap.

NOTE: Pass the dolly strap under the handles for the Architect® Series.

2.Place pieces of the shipping carton on the floor when rolling the dolly and refrigerator into the house. Move the refrigerator close to the built-in opening.

3.Place top of cardboard carton or plywood under refrigerator.

4.Stand the refrigerator up. First, place the left bottom edge of the refrigerator on the floor, stand the refrigerator upright and then lower the right-hand side of the refrigerator to the floor.

5.Reassemble the trim and top grille after the dolly has been removed from the refrigerator.

Install Anti-Tip Boards

IMPORTANT:

■To avoid tipping during use, the solid soffit must be within

1" (2.5 cm) maximum above the refrigerator. If the solid soffit is higher than 1" (2.5 cm) or one is not available, then the refrigerator must be braced.

■It is recommended that board(s) be installed before the refrigerator is installed.

■Board(s) must be long enough to fully cover the width of the compressor cover.

■Locate the board(s) so the bottom surface(s) of the board(s) is(are) 84" (213 cm) from the floor.

■During installation, raise the refrigerator up so there is

¹⁄₄" (6.35 mm) maximum between the top of the refrigerator and the bottom of the anti-tip board(s). Do not crush the compressor cover when raising the rear leveling legs.

To Install Anti-tip Boards

1.Mark the stud locations on rear wall 80" to 90" (203 cm to 229 cm) above floor.

2.Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 cm) (or longer) wood screws. The wood screws must be screwed into the studs at least 1½" (3.8 cm). The board(s) must overlap the compressor cover.

A B

C

2" (5 cm)

D

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

17

Page 16 Page 18
Page 17
Image 17
Jenn-Air W10379134A manual Move the Refrigerator into House, Install Anti-Tip Boards, To Install Anti-tip Boards
Page 16 Page 18

W10379134A specifications

The Jenn-Air W10379134A is a high-performance kitchen appliance that exemplifies innovation and quality in home cooking. Designed for the discerning chef, it combines advanced technologies with stylish aesthetics, making it a standout choice for modern kitchens.

One of the primary features of the W10379134A is its versatile cooking capabilities. This appliance supports various cooking methods, allowing users to bake, broil, and roast with precision. Its multi-functionality caters to a wide array of culinary techniques, ensuring that home cooks can experiment and perfect their recipes.

The appliance includes a powerful convection fan that ensures even heat distribution throughout the cooking space. This technology is vital for achieving consistent cooking results, whether baking a delicate soufflé or roasting a whole chicken. With the convection feature, the Jenn-Air W10379134A enhances efficiency, significantly reducing cooking times while preserving moisture and flavor in foods.

Another significant characteristic of the Jenn-Air W10379134A is its intuitive control panel, which provides users with an easy interface. The digital display is user-friendly, allowing cooks to select from various temperature settings and cooking options with minimal effort. Furthermore, the appliance is designed with pre-programmed settings that simplify many cooking tasks, making it approachable for cooks of all experience levels.

In terms of design, the Jenn-Air W10379134A boasts a sleek, modern aesthetic that seamlessly integrates into any kitchen decor. Available in stainless steel or other finishes, its elegant look enhances the overall visual appeal of the kitchen. The quality of materials used ensures durability and longevity, making it a worthwhile investment for homeowners.

Safety is also paramount with the Jenn-Air W10379134A. It is equipped with features such as a temperature probe and automatic shut-off functions, which provide peace of mind during cooking. These safety mechanisms help prevent overcooking and promote energy efficiency, which is essential in today’s eco-conscious world.

In conclusion, the Jenn-Air W10379134A emerges as a powerful, versatile, and stylish addition to any kitchen. With its advanced features, user-friendly interface, and elegant design, it meets the needs of both seasoned chefs and novice cooks alike, promoting culinary creativity while ensuring optimal cooking results.
Top Page Image Contents