COOKTOP SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed
■ | Tape measure | ■ | Marker or pencil |
■ | ■ | Pliers | |
■ | Phillips head screwdriver | ■ | ¼" drill bit |
■ | Drill | ■ | Jigsaw |
■ | Level | ■ | Ratchet with ³⁄₈" socket |
■6" socket extension
Parts supplied
■Vent grille
■
Parts needed
■A UL listed or CSA approved strain relief for ⁷⁄₈" (2.2 cm) knockout.
■A UL listed or CSA approved conduit connector for ¹⁄₂" (1.3 cm)
■UL listed wire connectors
■Metal ducting
■
To order, see the “Assistance or Service” section of the Use and Care Guide.
■Vent clamps
Check local codes. Check existing electrical supply. See “Electrical Requirements” section.
It is recommended that all electrical connections be made by a licensed, qualified electrical installer.
2
