Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal. Clean with a dry cloth.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil. (This does not apply to models with the ice maker mounted at the top of the freezer door.)

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture-proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

11

Page 10 Page 12
Page 11
Image 11
Jenn-Air W10487492A warranty Temperature and Moisture, Ice and Water
Page 10 Page 12

W10487492A specifications

The Jenn-Air W10487492A is a premium wall oven that embodies sophistication and modern culinary technology, designed to elevate your cooking experience. With its sleek stainless steel finish and minimalist design, this wall oven seamlessly integrates into any contemporary kitchen, enhancing both aesthetics and functionality.

One of the most prominent features of the Jenn-Air W10487492A is its advanced convection cooking technology. This feature ensures even heat distribution by utilizing powerful fans that circulate hot air throughout the oven. The result is perfectly cooked meals with reduced cooking times, allowing users to enjoy succulent roasts and baked goods with impressive consistency. This technology adapts to different baking and roasting needs, offering professional-grade results at home.

Another notable characteristic of this wall oven is its intuitive control panel, which features a full-color display. The intelligent interface allows users to easily navigate through cooking settings, select preferred cooking modes, and set timers with precision. The panel includes a variety of pre-programmed recipes, guiding users through every step of the cooking process, making meal preparation easier and more efficient.

The Jenn-Air W10487492A is also equipped with a self-cleaning feature, saving time and effort on maintenance. With the ability to heat to high temperatures to burn away food residue, it ensures the oven remains spotless without the need for harsh chemicals. This feature is particularly appreciated by busy home cooks who prioritize cleanliness without compromising on quality.

Moreover, this wall oven boasts a spacious interior, accommodating multiple dishes simultaneously. With ample rack positions, it provides flexibility for different cooking needs, whether you are baking a batch of cookies or roasting a multi-tiered cake. The oven’s high capacity is perfect for entertaining, making it an excellent choice for those who love to host gatherings.

Features like Wi-Fi connectivity and compatibility with smart home systems further enhance the functionality of the Jenn-Air W10487492A. With mobile app integration, users can remotely monitor cooking progress, preheat the oven on their way home, or receive notifications when dishes are done, allowing for a seamless cooking experience.

In summary, the Jenn-Air W10487492A wall oven combines modern design with cutting-edge technology, making it a standout choice for both casual cooks and culinary enthusiasts. Its convection cooking, user-friendly interface, self-cleaning capabilities, and smart connectivity make it a valuable addition to any kitchen, enhancing your culinary skills and elevating every meal.
Top Page Image Contents