Jensen BT1613 owner manual Select, System Menu

BT1613

Select

Press the AUDIO		VOL
CONTROL button (4)		VOL
to step through the
menu of audio	FAD	BAS
functions: volume
(VOL), bass (BAS),	BAL	TRB
treble (TRB), balance
(BAL), fader (FAD),

and volume (VOL). When adjusting audio functions, the unit will automatically exit select mode and return to the normal display after five seconds or when another function is activated.

Bass

Press the AUDIO CONTROL button (4) twice until “BAS” appears in the display. Within five seconds, turn the AUDIO CONTROL (3) clockwise or counter clockwise to adjust the bass from “-6” to “+6”. “0” represents a flat response. The bass level is shown on the display for five seconds or until another function is activated.

Treble

Press the AUDIO CONTROL button (4) three times until “TRB” appears in the display. Within five seconds, turn the AUDIO CONTROL (3) clockwise or counter clockwise to adjust Treble from “-6” to “+6”. “0” represents a flat response. The treble level is shown on the display for five seconds or until another function is activated.

Balance

Press the AUDIO CONTROL button (4) four times until “BAL” appears in the display. Within five seconds, turn the AUDIO CONTROL (3) clockwise (or counter clockwise) to adjust Balance between the right and left speakers from “BAL R12” (full right) to “BAL L12” (full left). “BAL C00” represents an equal balance level between the right and left speakers. The balance position is shown on the display for five seconds or until another function is activated.

Fader

Press the AUDIO CONTROL (4) five times until “FAD” appears in the display. Within five seconds, turn the AUDIO CONTROL (3) clockwise or counter clockwise to adjust balance between the front and rear speakers from “FAD R12” (full rear) to “FAD F12” (full front). “FAD C00” represents an equal balance level between the front and rear speakers. The fader position is shown on the display for five seconds or until another function is activated.

System Menu

Press and hold the DISP button (9) to

view the system “MENU”. Press the DISP button repeatedly or use the >> (14) or << (13) button to access the following MENU options.

PAIR HF/AD

This feature is used to pair your mobile phone to the unit’s Bluetooth system. To initiate the pairing process select “Pairing HF” and then press the AUDIO CONTROL button.

RE-CON/DIS-CON

Use this feature to reconnect or disconnect a paired mobile phone manually. Turn the AUDIO CONTROL (4) to select “RE-CON” to reconnect

or “DIS-CON” to disconnect and then press the AUDIO CONTROL button (4) to perform the operation.

BT VOL (00-42)

Use this feature to set the default voice volume for all incoming calls. Use the AUDIO CONTROL to adjust the voice volume from “00” to “42”.

Clock (CLK)

Turn the AUDIO CONTROL left to adjust the hours and right to adjust the minutes.

AREA

Turn the AUDIO CONTROL to select the appropriate frequency spacing for your area: USA, LAT (Latin America), EUR (Europe), or RUS (Russia).

DISTANT/LOCAL

This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. “Distant” is the default setting,

3