Jensen JE3207 Connecting the TV, Overview Connecting Antenna System, Connecting Cable System

Connecting the TV

Basic Connections

Overview

Connecting Antenna System

To display clear, crisp pictures, you must connect your TV correctly and choose the correct display format. It is strongly recommended to connect the cable and antenna input using a 75-ohm coaxial cable to receive an optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the TV.

The way in which you connect your TV will vary, depending on how your home receives a signal (antenna and satellite; cable and cable box).

Do not use an indoor antenna, which is especially susceptible to radio noise.

Disconnect all power sources before making any connections.

For best results, use this connection if you have an antenna system.

TV Left Side

PIC	D-SUB IN
AUDIO
	HDMI

Antenna cable

Connecting Cable System

Be sure to choose "Antenna" before you start Auto Program. See chapter "Getting Started" for details.

For best results, use this connection if you have a cable system.

TV Left Side

CATV cable

HDMI D-SUB IN

AUDIO PIC

Be sure to choose "Cable" before you start Auto Program. See chapter "Getting Started" for details.

9