JHD1120
BASIC OPERATION
Mute
| 14 |
|
|
|
|
| 21 |
|
|
| 18 | 19 |
3 | AS/PS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| DN | UP |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PTY | INFO |
12 |
|
|
|
|
|
|
|
|
|
| MENU | ENTER |
|
|
|
| AM 1 |
|
|
|
|
|
|
| |
T F |
|
| iPod | DISC | ST PS TITLE AR TISTCH. NA MECA T MEN U |
|
|
| ||||
|
| WB | M P3 | FM 2 | LD COMPOSERR PT IN TRDM ALARMSLEEP |
|
|
| ||||
|
|
| SAT 3 |
|
|
| ||||||
20 |
|
| JHD1120 |
|
|
|
|
|
| 40W x 4 |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
4 | 15 | 11 | 17 |
| 8 | 6 | 5 | 7 | 9 | 10 | 2 | 13 |
Press the MUTE button (17) to mute the audio output. Press MUTE again to restore the audio output to the previous level.
Mode
Press the MODE button (4) to select a different mode of operation, as indicated on the display panel. Available modes include the following: Tuner (AM/FM) > Auxiliary. Tuner is the default
16source when a prior source is no longer available.
Reset
The reset button should be activated for the following reasons:
•initial installation of the unit when all wiring is completed
•function buttons do not operate
•error symbol on the display
Power On/Off
Press the rotary encoder POWER button (1) to turn the unit on or off. The unit will resume at the last mode selected (Tuner, Auxiliary, etc.).
POWER
Volume Control
To increase the volume, turn the rotary encoder (1) to the right. To decrease the volume, turn the rotary encoder to the left.
Use a ball point pen or thin metal object to press the RESET button (20). This may be necessary should the unit display an error code.
Audio Menu
Press the AUDIO button (3) to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO button repeatedly. Once the desired menu item appears on the display, adjust that option by turning the rotary encoder (1) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The following menu items can be adjusted.
Bass Level
Use the rotary encoder (1) to adjust the Bass level range from
Treble Level
Use the rotary encoder (1) to adjust the Treble level range from
Balance
Adjusting Balance controls the relative level between the left and right speakers in each pair. Use the rotary encoder (1) to adjust the Balance between the left and right speakers from “L 12” to “R12”.
Fader
Adjusting Fade controls the relative level between the front and rear speaker pairs. Use the rotary encoder (1) to adjust the Fader between the rear and front speakers from “R12” to “F12”.
The maximum volume setting is 40.
5
