Jensen JHD3510 operation manual Controlling Playback, Accessing iPod Mode, Turning the iPod On/Off

JHD3510

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel buttons. The following iPod versions are supported:

•iPod 3G (firmware version 2.2 only)

•iPod Mini

•iPod 4G

•iPod Photo

•iPod Nano

•iPod 5G (Video)

Controlling Playback

Pausing Playback

During playback, press the 1/> button (8) to pause the iPod player. “Pause” will appear on the LCD. Press 1/> again to resume playback.

Repeat Play

During playback, press the 3/RPT button (5) to repeat the current song. “Repeat” will appear on the LCD. Press 3/RPT again to stop repeat playback.

Random Play

NOTE: iPod and iPod Cable sold separately.

During playback, press the 4/RDM button (7) to play all songs in the current category in random order. Random play will begin once the current song has finished playing. “RANDOM”

Accessing iPod Mode

To enter iPod mode from any other source, press the MODE button (4) until “iPod” appears on the display.

Turning the iPod On/Off

The iPod power turns on automatically when an iPod is connected to the 30-pin iPod cable, as long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it from the cable or by turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself.

8 Din iPod Ready Cable

HEAD UNIT

iPod	iPod	iPod	iPod	iPod
Video	photo		mini	nano

iPod Cable

will appear on the LCD. Press 4/RDM again to stop random playback.

Selecting Tracks

During playback, press the TUNE/SEEK << / >> button (18, 19) to play the previous or next track in the current category. Press the TUNE/SEEK << button (18) once to play the song from the start position or press TUNE/SEEK << twice to play the previous track.

Press and hold the TUNE/SEEK << / >> button (18, 19) to fast reverse/forward the song.

NOTE: If you press and hold the TUNE/SEEK << / >> button to change the current song to the previous/next song, you will exit fast reverse/forward mode.

Category Search

Press the S-MOD/ENTERbutton (2) to access Category selection mode. While in Category mode, repeatedly press the S-MOD/ENTERbutton to choose file search by Playlist, Artist, Album, Genre, or Song. After choosing a search category, use the 5/DN (9) and 6/UP (10) buttons to search the available files on the iPod. Press the 1/> button (8) to play the selected Playlist, Artist, Album, Genre, or Song.

NOTE: The iPod will continuously recharge when connected to the unit, as long as the vehicle ignition is turned on.

Alternate Display Mode

Press the DISP/SCROLL button (12) to change the display information between single and double line text display.

4	15	13	22			21			18	20
23
3										19
1										14
										17
16		11	8	6	5	7	9	10	2	12

11