13
Insert the plug of your headphones (not included) into the Headphone jack, on the back
of the unit and you can now listen in private. When using headphones, the speakers will
be disconnected automatically.
NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR
HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type
designed to allow you to hear outside sounds. Please note that excessively high
volume may still block outside sounds.
USING HEADPHONES (NOT INCLUDED)SETTING THE WAKE UP TIME
This unit has Dual Alarm function. Each ALARM can be set to wake to RADIO,
iPod / iPhone or ALARM. To set alarm time:
1. In standby mode, press and hold ALARM1 or ALARM2 button for 3 seconds to enter
the ALARM setting mode, LED shows the default alarm time 12:00 AM and the
ALARM1 or ALARM2 indicator flashing on the display.
2. Press UP / DOWN button to adjust minutes of you desired ALARM time. Press and hold
the button for fast forward / backward setting the alarm time.
3. Press ALARM1 or ALARM2 button again to confirm the ALARM time setting.
4. Press ALARM1 or ALARM2 repeatedly to select wake to ALARM (buZ) , RADIO (rAd),
iPod / iPhone (IPod) or turn off the alarm.
CHECKING THE WAKE UP TIMES
To check the wake up time, simply press and hold the ALARM 1 or ALARM 2 button for 3
seconds. The display will change from current time to wake up time. Release the ALARM
button, it will return to current time after 5 seconds.
WAKE TO RADIO
1. To select wake to radio mode, press the ALARM button you want to set repeatedly until
the display shows “rAd”.
2. Release the ALARM button and waiting about 3 seconds to confirm.
ALARM OPERATIONS