Note:

i.The relevant Alarm Indicator will blink when the alarm time is reached.

ii.If you have chosen the “Wake to RADIO” alarm mode, make sure that you have tuned to a station and adjusted the volume to a comfortable level.

iii.After waking to beeping, iPod/iPhone or Radio alarm, the volume level of the iPod or radio cannot be adjusted.

TURNING THE ALARM ON/OFF

With the JiMS-70i in STANDBY mode, briefly press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons once to activate or deactivate the alarm. The Alarm 1 or Alarm 2 Alarm Indicator will appear or disappear on the display.

SNOOZE FUNCTION

When the alarm sound is on, press the SNOOZE/SLEEP/DIMMER button once. The alarm sound will stop and resume after 9 minutes.

SLEEP TIMER

The sleep timer allows you to turn the unit off after a designated time is reached. You can use the SLEEP Timer to fall asleep to Radio or iPod/iPhone for 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes intervals.

1.) Turn the unit on and either dock your iPod/iPhone or tune to the desired radio station and set the volume to a comfortable level.

2.) Press the SLEEP button. The display will show 90 minutes of playing time and then return to the current time mode in 10 seconds.

The JiMS-70i will automatically turn off after 90 minutes has elapsed.

3). Press the SLEEP button repeatedly to select a sleep time. Each time the Sleep button is pressed, the Sleep time will be decreased in a 10 minutes decrement. The unit will play for the selected length of time then automatically turn off.

5.) To turn the unit off before the selected length of time, press and hold the POWER/FUNCTION button at any time.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and older, non-dockable iPods (except iPod shuffle 3rd gen) and listen to your external source through the speakers of this system.

1.Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

2.Plug one end into the Aux-in jack on JiMS-70i and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.

3.Turn on the external audio device.

4.To select auxiliary audio input, press the POWER/FUNCTION button to select “AUX” mode. The LED display will show “AU” for about 10 seconds and revert back to the current time.

5.Adjust the volume control on JiMS-70i. Operate all other functions on the auxiliary device as usual.

11

Page 12
Image 12
Jensen JIMS-70I user manual Sleep Timer, Auxiliary Input, Turning the Alarm ON/OFF, Snooze Function