Jensen JMC-670 Clock Setting, Compact Disc Operations, To Set The Current Time, BASIC DISCs PLAY

JMC-670 INSTRUCTION MANUAL

CLOCK SETTING

Note: The clock has to be set the first time you use the unit.

TO SET THE CURRENT TIME

For example to set the clock at 7:30 AM

1. In STANDBY Mode, press MEMORY Button (7/H6) once. Hour digit flashes to prompt for input.

2. Press the / Button (11/H7) to adjust the hour.

Note: Make sure the hour is set so that AM or PM is correctly displayed.

3.Press MEMORY Button (7/H6) to confirm the selection and minute position flashes to prompt for input.

4.Press the / Button (11/H7) to adjust the minute. 5.Press MEMORY Button (7/H6) again to complete setting.

COMPACT DISC OPERATIONS

NOTE: This player plays not only commercial CDs but also self-complied CD-R/RW/MP3-CD discs.

JMC-670 INSTRUCTION MANUAL

Note: If no CD is inserted in the chosen CD location, “NO DISC” appears.

7.The CD indicator (#D9) appears with either “” or “”, indicating the current CD location. 8.Press Button (9/H5) to start playing.

TO:	PRESS:				Multi-Function Display:
Stop play	(8/H11)				Total number of tracks and total play
					time are shown
Pause play	(9/H5) once				Playback Indicator	(D8) blinks
Resume play after pause	(9/H5) again				Current playing track number and
					elapsed play time are shown
Scan forward and backward	And hold		/	(11/H7)	Play time changed rapidly
Skip tracks	/	(11/H7)			Playing track number changed
Control the volume	± Volume Control (15/H9)				Volume Level is shown
Stop output from speakers	MUTE Button (H16) once				“MUTE” (#D4) lights
Resume speaker output	MUTE Button (H16) again				“MUTE” (#D4) off

Other CD/MP3-CD function

1)Repeat (12/H15) - Use this key can select different Play Mode between repeat one, repeat folder (MP3- CD only), repeat current CD and random play.

a) Repeat current track - Press Repeat button once, the REPEAT indicator appears and current track repeated continuously.

:

b)Repeat Folder (MP3-CD only) - Press Repeat button until REPEATFOLDER indicator shown on display, the selected folder will repeated continuously.

:

c)Repeat current disc - Press Repeat button unitil REPEATALL indicator shown on display, the current CD will repeat continuously.

:

d)Random play - Press Repeat button until RANDOM indicator appears on display and the current disc will play randomly.

BASIC DISC(s) PLAY

1.Press the Button (10/H1) to turn on the unit.

2.Press the OPEN/CLOSE Button (2/H10) to open both the CD door. 3.Place the CD(s), with label side facing outward, inside the CD compart

ment. Press OPEN/CLOSE Button (2/H10) again to close the CD doors.

IMPORTANT: The CD doors are motorized doors. DO NOT PUSH WITH HAND OR USE ANY OTHER MEANS TO OPEN OR CLOSE IT. THIS COULD DAMAGE THE DOOR MECHANISM.

4.Press the Function Button (3/H3) to operate the unit in CD mode.

5. Press CD1/CD2 (4/H4) button to select the CD location.

6.The unit will scan the CD in selected CD compartments, the total number of tracks and total play time of the CD in the chosen CD location appear in the display (18). (Only Folder number and track number will shown for MP3-CD)

E-9

H1

H5

H4

H3

H10

:

DISC ERROR

Note: If the disc is dirty, damaged or unreadable, the ‘NO DISC’ will appear in the display. If this occurs, clean the disc, insert the disc correctly, or try another disc.

PROGRAMMINGCDTRACKS

With this function you can program up to 20 titles of selected disc in the order you desire.This function can only be done in stop mode.

1.Press the MEMORY Button to start programming tracks, “MEMORY” indicator, ‘ ‘ appear in the display and blinks.

E-10

HX-1056M3 IB JENS 001 REV0.P65 6 7/20/2005, 2:53 PM