Jensen JTA-980 C Un-Finalizeor Erase A Cd-Rwdisc, I Un-Finalizea Cd-Rwdisc, Ii Erase One Track

Notes:

-The time for finalizing is subject to the contents of the recording and it may take up to 15 minutes in some cases.

-No buttons will work during the finalize process.

-Never turn off the power or un-plug the power cord during finalize process.

-The CD-R disc cannot be recorder again after finalizing.

-Finalized CD-R discs can be played in ordinary CD players, but finalized CD-RW disc may not play in ordinary CD players.

-Due to the variance of the compatibility of CD-R or CD-RW discs in the market, please change to other one if you find the recording performance of the existing one unacceptable. This is not a malfunction of the system.

C) UN-FINALIZE OR ERASE A CD-RW DISC

It is possible to erase the last recorded track or erase a whole record disc (CD-RW only).

I) UN-FINALIZE A CD-RW DISC

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be un-finalized in CD-2compartment.

2.Wait until “busy” disappears from the LCD display, press the “ERASE “ button with the CD in stop mode. The message “UN FIN-d “ will appear on the LCD display.

3.Press the “PLAY/PAUSE ” button to start the un-finalize process and wait until “busy

“disappears from the LCD display.

4.“NO TOC “ indicator, total track numbers and playing time will appear on the LCD display after the un-finalize process is completed.

II) ERASE ONE TRACK

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be erased in CD-2compartment. Wait until the “busy” message disappears from the LCD display. If the disc is finalized, you have to un-finalize it before you can delete tracks.

2.Press the “ERASE “ button when in stop mode, erase the last track message and “Er XX(track no.)” will appear on the LCD display.

3.Press the “PLAY/PAUSE ” button to start erasing the last track.

4.Repeat step 2 and 3 to continue the erasing.

5.Press the “ STOP ” button to quit the erase mode if necessary.

III) ERASE ALL TRACKS

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be erased in CD-2compartment.

2.Press the “ERASE “ button twice with the CD in stop mode and wait until erase all message “Er ALL“ appears on the LCD display.

3.Press the “PLAY/PAUSE ” button to start erasing.

4.The LCD will show “0000000 “ to confirm the erase process is completed.

Notes:

-This operation cannot be undone.

-You cannot erase tracks one-by-one on a CD-RW disc recorded on another system, but it is possible to erase all.

16