Jensen MCD5070 operation manual Wiring

MCD5070

WIRING

	ANTENNA	ANTENNA
FUSE		EXTENDER
	JACK	CABLE
20-PIN
AUDIO/POWER
HARNESS
(See Figure 1)

RCA-TO-RCA CABLE

(not supplied)

REAR LINE OUT	WHITE
	L-CH
GREY

RED	AMP
	RCH-

BLUE	Power Antenna
	Connect to power antenna or amplifier,
	If not used, tape bare end of wire.
BLACK	Ground
	Connect to ground terminal or clean
	unpainted metal part of chassis.

RED

Accessory / Ignition

Connect to existing radio wire or radio fuse.

LEFT FRONT	RIGHT FRONT
WHITE-BLACK LF-	GREY-BLACK RF-
WHITE LF+	GREY RF+
LEFT REAR	RIGHT REAR
GREEN-BLACK LR-	VIOLET-BLACK RR-
GREEN LR+	VIOLET RR+

Figure 1: 20 PIN HARNESS PIN CHART

	1	2	3	4	5		6	7	8	9	10
	11	12	13	14	15		16	17	18	19	20
PIN		WIRE COLOR					FUNCTION / LABEL
1	GREY / BLACK					RIGHT FRONT SPEAKER (				)
2	GREY					RIGHT FRONT SPEAKER (+)
3	VIOLET					RIGHT REAR SPEAKER (+)
4	VIOLET/BLACK					RIGHT REAR SPEAKER (				)
5	EMPTY					N/A
6	GREEN					LEFT REAR SPEAKER (+)
7	GREEN / BLACK					LEFT REAR SPEAKER ( )
8	EMPTY					N/A
9	BLACK					REAR PRE-AMPLIFIER LINE OUT COMMON
10	RED					RIGHT REAR PRE-AMPLIFIER LINE OUT
11	WHITE					LEFT FRONT SPEAKER (+)
12	WHITE / BLACK					LEFT FRONT SPEAKER (				)
13	EMPTY					N/A
14	BLUE					POWER ANTENNA
15	RED					IGNITION (ACC)
16	BLACK					CHASSIS GROUND
17	EMPTY					N/A
18	EMPTY					N/A
19	EMPTY					N/A
20	WHITE					LEFT REAR PRE-AMPLIFIER LINE OUT

5