Jensen MS4200RS user manual Radio, Setting stations

RADIO

Radio
Listening to radio
If the unit is not yet in radio mode:	13:29
☞ Press the TUNE button.
	FM	RADIO
Select waveband	105.9
	Radio 1
In radio mode:

☞Press the BAND button.

☞Select the desired waveband and press OK.

✎The following wavebands are available:

FM, FM AST (Autostore) AM, AM AST (Autostore). FM AST and AM AST can only be stored with the Autostore function.

Setting stations

Stations can be set or sought in various manners (e.g. user mode “Expert”):

1.Press OK once or several times to select the search mode.

2.4 or 6 to start the selected search mode.

Recall RDS stations by name (only for FM)

The stations are sorted alphabetically.

If you hear an error message: Refresh the station name list by activating “RDS Memo”. ➽ next page.

Automatic search

The radio searches for stations with strong signals.

✎If “TA Scan” is activated, the radio will search only for stations from which traffic announcements can be received.

✎If “TMC Scan” is activated, the radio will search only for stations from which traffic information can be received.

Tuning to a stored station

Select one of the stations already stored manually or using Autostore.

Setting frequency manually

(if “Manual tuning” is activated. ➽ next page.)

After 50 seconds or after the selection of another tuning method, the radio will switch back to automatic frequency tuning.

23