Jensen MS4200RS user manual Activating products, My C-IQ, Code Input, R 5 Z 4 a K, Quit

C-IQ – INTELLIGENT CONTENT ON DEMAND

Activating products

Once you have received your enable code, enter it		Code Input
into the system.	8 Q R 5 - Z 4 A K
☞ In the main control menu, select “C-IQ” then
	G 6 _ _ - _ _ _ _
“Code Input”.
☞ The cursor appears automatically on the first digit	OK	Quit	?
of the code.

☞Press OK to activate each digit in the code.

☞Next, use the cursor keys to select the correct code digit and confirm your selection by pressing OK.

✎You may change any of the code digits at any time by moving the cursor to the required position in the code and pressing OK.

☞Once the code is complete, the cursor will automatically move to “OK”. Confirm by pressing OK.

☞Once you have entered a correct code, the system will display information about the C-IQ products you have just activated.

✎The system will inform you if an incorrect code has been entered, and/or if your system software is not capable of processing the encrypted information.

☞In these cases, select either “OK”or “C-IQ Service”, if you wish to establish contact, and press the OK key.

It is possible to operate the system without activation. Destinations can be entered. Navigation information, however, will only be provided for activated areas and for activated services.

My C-IQ

You have the choice of obtaining information about your activation status at any time.

☞Select “My C-IQ” in the “C-IQ” menu.

☞Select “Active products” if you wish to find out more about the products you have activated.

☞Select “Starting soon” if you wish to view details of products you have received which will soon be active.

☞Select “Expiring soon” if you wish to find out which service products you currently have in use and for how long they will continue to be available.

☞Select “Revocated products” to view a list of products which have been revocated.

33