Jensen SB6051 Location Of Controls, Precautions For Use, Power Connection, Listening To Radio

LOCATION OF CONTROLS

1)DUST COVER

2)LEFT SPEAKER

3)DIAL SCALE

4)TUNING KNOB

5)FUNCTION SELECTOR (PHONO/AM/FM/FM STEREO)

6)FM STEREO INDICATOR

7)RIGHT SPEAKER

8)POWER ON/OFF AND VOLUME CONTROL

9)POWER LED INDICATOR

10)45 RPM ADAPTOR

11)33/45/78 RPM SPEED SELECTOR

12)TONE ARM CLAMP

13)AUTO STOP SWITCH

14)LINE OUT SOCKET

15)FM ANTENNA

16)AC CORD

CAUTION:

THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.

PRECAUTIONS FOR USE

•UNPACK ALL PARTS AND REMOVE THE PROTECTIVE MATERIAL.

•DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE.

•DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL INCHES AROUND THE UNIT FOR VENTILATION.

POWER CONNECTION

1.CONNECT THE POWER CORD (16) TO A 120V AC ~ 60Hz OUTLET.

2.TURN ON THE POWER (8) BY ROTATING THE VOLUME CONTROL CLOCKWISE UNTIL A CLICK IS HEARD. IF THE POWER LED INDICATOR (9) IS ON WITH RED LIGHT, IT MEANS THAT THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.

LISTENING TO RADIO

1.SET THE FUNCTION SELECTOR (5) TO THE DESIRED RADIO BAND (AM, FM OR FM-STEREO).

2.TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (4).

3.ADJUST THE VOLUME CONTROL (8) TO OBTAIN THE DESIRED SOUND LEVEL.

FM & FM-STEREO RECEPTION

zWHEN THE FUNCTION SELECTOR (5) IS SET TO THE “FM” POSITION, PROGRAMS ARE RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.

zSET THE FUNCTION SELECTOR (5) TO THE “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE LED “ST” INDICATOR (6) WILL LIGHT UP WHEN A FM STEREO PROGRAM IS BEING RECEIVED.

4