WARNING

!Do not throw the product into fire to avoid danger of explosion.

!Do not immerse into water or get soaked since the battery charging function will be lost.

!Place the product far away from heat sources, and protect the product from direct sunlight.

!Do not use the product where electric appliances are prohibited.

!Protect the product from violent impact and vibrations.

!No compensation responsibility for malfunctions caused by improper use.

!Do not attempt to disassemble or alter any part of the unit that is not expressly described in this guide. Internal inspections, alternations and repairs should be conducted by qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1.Water and Moisture

The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a set basement.

2.Ventilation

This unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

3.Heat

The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

4.Power Source

The unit should be operated by the power source described in the operating instructions or as marked on the appliance.

5.Cleaning

The unit should be cleaned properly with care.

6.Objects and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into any opening or vents

3

Page 2 Page 4
Page 3
Image 3
Jensen SMPS-85 user manual Important Safety Instructions
Page 2 Page 4

SMPS-85 specifications

The Jensen SMPS-85 is a highly regarded power supply unit renowned for its compact design and robust performance. Tailored for various applications, the SMPS-85 stands out due to its reliable operation and efficient energy conversion. One of its main features is a high power density, allowing it to deliver a stable 85W output while maintaining a small footprint. This is particularly advantageous for space-sensitive projects where every square inch counts.

One of its key technologies is the switch-mode power supply (SMPS) architecture, which differs significantly from traditional linear power supplies. The SMPS design uses transistors to switch the input voltage on and off at high frequencies. This method not only enhances efficiency but also reduces the heat generated during operation, making the SMPS-85 suitable for continuous use in demanding environments.

The SMPS-85 also supports a wide input voltage range, accommodating various power sources typically ranging from 90V to 264V AC. This versatile input capacity makes the unit suitable for global applications, as it can adapt to different electrical standards without requiring additional modifications.

In terms of output characteristics, the Jensen SMPS-85 features excellent load and line regulation. This ensures that the output voltage remains stable despite fluctuations in input voltage or variations in load conditions. The unit is designed to deliver reliable performance even under challenging electrical conditions, which is critical for sensitive electronic devices.

Moreover, the SMPS-85 incorporates advanced protective features such as over-voltage protection, under-voltage protection, and short-circuit protection. These safeguards enhance the reliability and longevity of the power supply, making it a dependable choice for engineers and developers.

The unintrusive size of the SMPS-85 is complemented by its lightweight construction, which facilitates easy installation and integration into a variety of systems. Whether used in consumer electronics, industrial automation, or telecommunications, the Jensen SMPS-85 proves to be a versatile power solution that combines efficiency, durability, and ease of use.

In summary, the Jensen SMPS-85 provides an ideal blend of power output, efficiency, and protective features, making it an outstanding choice for a wide range of applications where reliable power is paramount.
Top Page Image Contents