5.Fully insert the audio input plug from the speaker bag into the headphone output jack of your external audio player (MP3 player, iPod® or iPhone ™ ).

6.Gradually increase the volume output of the attached player until the desired volume level is reached.

7.During operation the attached external player (MP3 player, iPod or iPhone) can be stored inside the speaker bag. A net pouch is located inside the speaker bag for easy storage.

8.The case can be zipped up to protect your audio player during use.

TROUBLESHOOTING GUIDE

Should you experience difficulties in the use of this unit, please refer to the following chart or call 1-800-777-5331 for Customer Service.

Problems

Possible Solutions

 

1.

Make sure the batteries are inserted properly with the

Unit does not turn on after

correct polarity as marked inside the compartment.

switch on the power switch.

2. The batteries may be exhausted. Please change all

 

 

batteries at the same time.

 

1.

Make sure the volume on the attached player is not set to

 

zero and also check the connection between the audio input

 

jack and the external player.

No sound coming from the

2.

Song files on your player may be corrupted. Please

speaker

 

download from your computer again.

 

3.

External player (MP3 or iPod or iPhone) is not on.

 

4.

Check and make sure the audio input cord is not

 

damaged.

 

 

 

 

1.

Decrease the volume of the external player.

Sound is distorted.

2.

Sound source from your player is distorted, please

 

download from your computer again.

SERVICE

Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible battery leakage. We are not responsible for batteries returned with the product or for the cost of replacement.

Distributed by:

Spectra Merchandising International, Inc.

6

Page 5 Page 7
Page 6
Image 6
Jensen SMPS-85 user manual Troubleshooting Guide, Problems Possible Solutions
Page 5 Page 7

SMPS-85 specifications

The Jensen SMPS-85 is a highly regarded power supply unit renowned for its compact design and robust performance. Tailored for various applications, the SMPS-85 stands out due to its reliable operation and efficient energy conversion. One of its main features is a high power density, allowing it to deliver a stable 85W output while maintaining a small footprint. This is particularly advantageous for space-sensitive projects where every square inch counts.

One of its key technologies is the switch-mode power supply (SMPS) architecture, which differs significantly from traditional linear power supplies. The SMPS design uses transistors to switch the input voltage on and off at high frequencies. This method not only enhances efficiency but also reduces the heat generated during operation, making the SMPS-85 suitable for continuous use in demanding environments.

The SMPS-85 also supports a wide input voltage range, accommodating various power sources typically ranging from 90V to 264V AC. This versatile input capacity makes the unit suitable for global applications, as it can adapt to different electrical standards without requiring additional modifications.

In terms of output characteristics, the Jensen SMPS-85 features excellent load and line regulation. This ensures that the output voltage remains stable despite fluctuations in input voltage or variations in load conditions. The unit is designed to deliver reliable performance even under challenging electrical conditions, which is critical for sensitive electronic devices.

Moreover, the SMPS-85 incorporates advanced protective features such as over-voltage protection, under-voltage protection, and short-circuit protection. These safeguards enhance the reliability and longevity of the power supply, making it a dependable choice for engineers and developers.

The unintrusive size of the SMPS-85 is complemented by its lightweight construction, which facilitates easy installation and integration into a variety of systems. Whether used in consumer electronics, industrial automation, or telecommunications, the Jensen SMPS-85 proves to be a versatile power solution that combines efficiency, durability, and ease of use.

In summary, the Jensen SMPS-85 provides an ideal blend of power output, efficiency, and protective features, making it an outstanding choice for a wide range of applications where reliable power is paramount.
Top Page Image Contents