UV8020
USING THE TFT MONITOR
Open/Close TFT Monitor
Open TFT Monitor
Press the EJECT button on the front panel (5) or remote control (23) to slide the monitor panel down and reveal the disc and SD card slots.
Close TFT Monitor
Press the EJECT button on the front panel (5) or remote control (23) to close the monitor panel.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to the viewing angle. The monitor angle can be adjusted for optimum viewing using one of the following methods.
Step by Step Angle Adjustment
Press the ( 
) or ( 
) button on the remote control (25, 24) to adjust the tilt angle of the screen one step at a time.
Continuous Angle Adjustment
Press and hold the ( 
) or ( 
) button on the remote control to adjust the tilt angle in a continuous motion.
On-Screen Panel Controls
Press and hold the 
/EJECT button (5) on the control panel to display the
TILT+ |
| TILT - |
| EXIT |
|
|
|
|
|
•TILT+: Touch repeatedly to tilt the bottom of the screen outward.
•
•EXIT: Touch to exit the
Reverse Driving Use
If a review video camera is connected, the monitor automatically switches to CAMERA mode when the vehicle is put into reverse. When the vehicle is taken out of reverse, the monitor returns to the source in use previously.
Image Setting
Table 2 shows the video output mode for each playing source.
Table 2: Video Output Modes
Playing Source | Video Output Modes |
|
|
|
|
AM/FM TUNER | RGB Mode |
|
|
DVD | RGB Mode |
|
|
AUX IN | CVBS Mode |
|
|
*CVBS – Composite Video Baseband Signal
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle brake switch, the front TFT monitor will display video only when the parking brake is engaged.
8
