UV8020

INSTALLATION

ISO DIN Installation

This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialty shop for assistance on this type of installation.

1.Remove the existing factory radio from the dashboard or center console mounting. Save all hardware and brack- ets as they will be used to mount the new radio.

2.Remove the four screws at the front of the radio that attach the mounting sleeve to the radio chassis (two at the top and two at the bottom). Remove the Half Sleeve.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

ISO INSTALLATION

CAUTION: Do not exceed M5 X 6MM screw size. Longer screws may touch and damage components inside the chassis.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the dash. Follow the wiring diagram carefully and make certain all connections are secure and insulated with wire nuts or electrical tape. After completing the wiring connections, plug the ISO connectors into the mating sockets on the rear of the chassis. Turn the unit on to confirm operation (vehicle ignition switch must be “on”). If the unit does not operate, re-check all wiring until the problem is corrected.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure in step 1.

CAUTION: For proper operation of the CD player, the chassis must be mounted within 30° of horizontal. Make sure the unit is mounted within this limitation.

NOTE: It is the end-users responsibility to install and operate this unit in a manner in accordance with local, state and federal laws. The PARKING BRAKE wire MUST BE CONNECTED as directed in the manual.

Installation Using Mounting Sleeve

1.Press the metal levers on both sides to remove the mounting sleeve from the radio.

2.Install the sleeve.

a.Install adapter if necessary (optional).

b.Install sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

INSTALL HALF SLEEVE

2b

c.Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

TAB

TAB

DASHBOARD

DASHBOARD

3.Use the M5 x 6 screws (provided) to install the mounting brackets to each side of the radio using the holes indicated below.

Install Bracket Here

Non-Designated

Screw Prohibited

M5X6

SCREW

BRACKET

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

2

Page 5 Page 7
Page 6
Image 6
Jensen UV8020 operation manual Installation, Install Half Sleeve, TAB Dashboard, Screw Bracket
Page 5 Page 7

UV8020 specifications

The Jensen UV8020 is a cutting-edge marine entertainment system designed to enhance the audio experience on the water. This versatile unit is engineered for outdoor environments, incorporating advanced technologies and features that make it a popular choice among boating enthusiasts.

One of the standout characteristics of the Jensen UV8020 is its robust design, built to withstand the harsh conditions often found in marine environments. Its weather-resistant faceplate ensures durability against moisture, salt, and sun, making it an ideal companion for sea adventures. The unit is also designed with a UV-resistant finish to prevent fading and wear, enhancing its longevity.

At the heart of the Jensen UV8020 is its powerful 4-channel amplifier, which delivers an impressive 240 watts of peak power. This ensures crystal-clear audio quality, whether users are listening to their favorite tunes or navigating through the waves. The system supports multiple audio formats, including MP3, WMA, and WAV, providing flexibility for music playback from various sources.

The Jensen UV8020 features Bluetooth connectivity, allowing users to stream audio wirelessly from smartphones and tablets. This feature adds convenience, enabling seamless integration with mobile devices. Additionally, the unit includes a USB port for easy access to music stored on flash drives, as well as an auxiliary input for connecting other audio sources.

Another notable feature is the built-in AM/FM radio tuner, providing access to a wide range of radio stations. The radio is equipped with a digital display, making it easy to navigate between channels and see song information. Preset stations can be stored for quick access, enhancing the user experience while out on the water.

User-friendly controls are a hallmark of the Jensen UV8020, with a large, clear display and intuitive buttons that make operation straightforward, even while navigating. The system supports multiple speaker outputs, allowing users to customize their audio setup according to their boat's layout.

Overall, the Jensen UV8020 is a versatile and reliable choice for marine entertainment, blending advanced technology with rugged design. Its combination of weather resistance, powerful audio performance, and user-friendly features makes it an exceptional addition to any boating experience. Whether it's a day out on the lake or a weekend adventure at sea, the UV8020 ensures that music and connectivity are always within reach.
Top Page Image Contents