VM9510TS

PREPARATION

Congratulations on your purchase of the Jensen VM9510TS Mobile Multimedia AM/FM/DVD Receiver.

It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9510TS installed by a reputable installation shop.

Features

Single DIN Size

Ultra slim slot-in DVD core mechanism

7 inch Panasonic TFT monitor

Wide screen TFT display and segment LCD display

Rotary volume control

ISO Double-DIN chassis

Light weight proprietary DVD core mechanism

Wide screen (16:9) 6.5" TFT touch screen monitor

Main System 18 Watts x 4 RMS / 60 Watts x 4 Peak

240 watts total system power

Multi-Zone media distribution

AM / FM Tuner

TV Tuner with antenna

Supports NTSC and PAL, auto negotiation

Full, Wide, Normal and Off (Standby) screen modes

Motorized TFT panel has 16 precise angle adjustments via remote control or infinitely variable manual adjustment from the front panel

Auto-activated rear view camera input - Reverse gear over rides the TFT screen to display video from a rear mounted camera

Over current motor protection for obstructed TFT panel

Compatible optical / SD Card formats: DVD-R/RW, DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/ WMA files burned onto a DVD+R/RW or DVD-R/RW and Kodak Picture CD

SD Card slot

Multi-language, multi-subtitle and multi-angle playback options

Last position memory for optical disc.

Parental Lock - Uses a password and disc rating set-up to prevent unauthorized user access from display content

Audio Mute

5-Way joystick navigation

Two remote controls - a full function front remote control and a limited function Kid-Zone remote control for back seat operation

Over and under voltage protection to insure the unit operates within designed parameters

Damped DVD mechanism with 16Mbit flash memory ESP (Electronic Shock Protection) provide smooth disc playback under the severest road conditions

Tools and Supplies

You will need these tools and supplies to install your VM9510TS:

Torx type, flat-head and Philips screwdrivers

Wire cutters and strippers

Tools to remove existing radio (screwdriver, socket wrench set or other tools)

Electrical tape

Crimping tool

Volt meter/test light

Crimp connections

18 gauge wire for power connections

16 – 18 gauge speaker wire

WARNING! Only connect the unit to a12-volt power supply with proper grounding.

WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit without the assistance of a professional. For details, please consult your local car stereo specialty shop.

WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.

WARNING! Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.

NOTE: If the VM9510TS is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

1

Page 5
Image 5
Jensen VM9510TS operation manual Preparation, Features, Tools and Supplies, Disconnecting the Battery