VM9511TS

INSTALLATION

Pre-installation

1.Press the metal levers on both sides to remove the half- sleeve from the radio.

2.Remove the transport screws.

PREPARE RADIO

3.Install the half-sleeve.

a.Install adapter if necessary (optional).

b.Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

c.Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

d.Install support strap to make the unit more stable.

INSTALL HALF SLEEVE

3d

3c

3a

3b

CAUTION! Be careful not to damage the car wiring.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3.Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9511TS uses one 15 amp mini-ATM fuse, located in the black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

1.Connect wiring adapter to existing wiring harness.

2.Connect antenna lead.

3.Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

5.Replace any items you removed from the dashboard.

FINAL INSTALLATION

Final ISO-DIN Installation

1.Remove trim ring.

2.Mount factory brackets on new radio using existing screws from old radio.

3.Slide radio chassis into dash opening and secure.

4.Reinstall dash panel.

FINAL ISO-DIN INSTALLATION

Using the iAUX3 External AV Connector

The iAUX3 (sold separately) allows you to connect a variety of external devices, including a VCR, DVD player, portable MP3 player, etc., to your VM9511TS without removing the radio.

To install the iAUX3, connect it to the AUX-IN cables on the back of the VM9511TS (see the Wiring Diagram on page 3),

and then install the iAUX3 in a location convenient for plugging in auxiliary devices.

5

Page 8 Page 10
Page 9
Image 9
Jensen VM9511TS instruction manual Installation
Page 8 Page 10

VM9511TS specifications

The Jensen VM9511TS is a cutting-edge multimedia receiver designed to enhance the in-car entertainment experience while keeping the focus on safety and functionality. One of its standout features is the 6.8-inch touchscreen display, which enables users to easily navigate through different functionalities. The screen boasts a high resolution, ensuring that videos and images are crisp and clear, allowing for an enjoyable viewing experience.

One of the main attractions of the Jensen VM9511TS is its compatibility with various media formats. The receiver supports DVDs, CDs, and a range of digital formats, meaning users can enjoy their favorite content from a variety of sources. The built-in Bluetooth connectivity is another significant feature, enabling hands-free calling and audio streaming from smartphones. This not only enhances convenience but also contributes to safer driving by allowing users to keep their hands on the wheel.

Additionally, the VM9511TS features USB and AUX inputs, providing further options for connecting external devices. Whether it's a flash drive loaded with music or a smartphone through an auxiliary cable, users can easily play their preferred media. The receiver also supports video playback through its rear-view camera input, making it an excellent choice for those looking to enhance their vehicle's safety features.

Audio quality is a key focus of the Jensen VM9511TS, which is equipped with a built-in amplifier. The unit ensures that sound is delivered with clarity and power. It also offers customizable audio settings, allowing users to adjust bass, treble, and balance to suit their preferences. The equalizer settings available provide a tailor-made listening experience, enhancing the enjoyment of any type of music.

Moreover, the Jensen VM9511TS is designed with user-friendliness in mind. Its intuitive interface simplifies navigation, and the responsive touchscreen allows for quick access to functions. The receiver also supports steering wheel controls, allowing users to keep their attention on the road while adjusting settings.

In summary, the Jensen VM9511TS is a versatile multimedia receiver that combines functionality with modern technology. Its range of features, from touchscreen navigation to audio customization, makes it a top choice for those seeking to upgrade their car's entertainment system while ensuring a safe driving environment. With its robust capabilities and user-centric design, the Jensen VM9511TS stands out in the competitive landscape of in-car receivers.
Top Page Image Contents