®
|
| XA4150 | |
Features |
|
| |
|
| ||
The Jensen XA4150 power amplifier is a two- | • Bridgeable design to direct full power to two | ||
channel | speakers | ||
amplifier. The XA4150 includes: |
| Audio Amplifiers | |
• RCA inputs |
| ||
|
| ||
• High level inputs |
| Amplification offers two advantages: | |
• Continuously variable low pass or high | • The XA4150 amplifier can make the sound | ||
pass crossover |
| of your receiver fuller and richer, even at low | |
• Bass boost feature |
| volume levels. | |
• Remote turn on/off |
| • Many automotive receivers provide four to | |
• Electronic protection circuitry to protect the | 10 watts at maximum power. At 75 watts | ||
amplifier from short circuit, DC offset and | RMS per channel (200 watts bridged), the | ||
thermal overload |
| XA4150 can be played substantially louder, | |
• Unique, | permitting the use of more powerful | ||
speakers. | |||
• 4 x 75 watts RMS per channel | (4 x 125 | ||
| |||
watts peak) |
|
| |
• 2 x 200 watts RMS bridged into a 4 ohm |
| ||
load |
|
| |
|
|
| |
Installation
Before You Begin Installation
Before you begin, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start. There is a list of supplies and tools on the next page.
Amplifier Location
Disconnect Battery
Before you begin, always disconnect the battery negative terminal.
–
+
Important
Allow air circulation around the amplifier.
The XA4150 amplifier’s compact design allows greater flexibility in mounting. It can be mounted under a seat or in the trunk.
When selecting a location, remember that amplifiers generate heat. Select a location where air can circulate around the amplifier. Do not cover the XA4150 with carpets or enclose it behind interior trim panels. Do not mount the amplifier in an inverted or upside down configuration. Every installation will be a bit different based upon vehicle design. Check all locations and placements carefully before making any cuts or connections.
Important
If wiring connections are made wrong, the unit will not operate properly and it could be damaged. Follow the installation instructions carefully, or have the installation handled by an experienced technician.
Professional Tip
Amplifier Installation Kit
Your installation job will be much easier if you purchase an amplifier installation kit. These kits often include
2
5314Eamp.p65 | 2 | 4/10/99, 7:08 PM |
