INTRODUCTION
Welcome to Jensen!
This manual is designed to provide information for the owner, salesperson and installer. For those of you who want quick information on how to install this product, please turn to the Installation Section of this manual. Other information can be located by using the Table of Contents. We at Jensen have worked very hard to make sure all the information in this manual is current. But, as we are constantly finding new ways to improve our product, this information is subject to change without notice.
Installation | Page 3 |
Specifications | Page 7 |
Warranty | Page 8 |
|
|
If, after reading your manual, you still have questions regarding this product, we recommend that you see your Jensen dealer. If you need further assistance, you
can call us direct at
Be sure to have your model number and date of purchase available when you call. Please read your warranty clearly and retain your receipt for possible future use.
Preparation
Disconnect battery cable from negative ( - ) battery terminal.
WARNING: Check vehicle's owner's manual before disconnecting the battery. Disconnecting the battery in some vehicles may require an anti- theft code when reconnecting. Some vehicles may run rough after reconnecting the battery and require that the
Check all safety regulations in your vehicle's owner's manual.
To ensure an
If using provided grilles, be sure mounting location is sufficient distance from door and/or window handles.
Required Tools
The following is a list of tools needed for installation:
#2 Phillips screwdriver
Battery post wrench
Hand held drill w/assorted bits
Wire strippers
Wire crimpers
Wire cutters
3mm allen wrench
Since some of these Jensen Full Range Speakers are most often used as direct replacements for stock speakers, some of the following instructions will not apply. For custom installations see your Authorized Jensen Dealer.
2
