Jensen Tools warranty Specifications, XA2125, XA275, XA250

®

XA2125, XA275, XA250

Specifications

XA Series 2-Channel.......................................................................................Amplifiers	20 Hz-20 kHz ± 0.5 dB
Frequency Response
Signal to Noise Ratio @ Rated Power	>100 dB
Channel Separation @ Ref. Power	>65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms	<0.8%
Speaker Impedance	2-8 ohms
Input Impedance	47 k ohms
Bass Boost Center Frequency	45Hz
Crossover	12 dB/octave, Butterworth
Power Requirement	14.4 VDC (10.8-15.6 VDC allowable)
XA2125
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms)	125 Watts per channel RMS, < 0.5% THD
(2 ohms)	175 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged	350 Watts per channel RMS, < 0.8% THD
Dimensions	3" x 11.125" x 10" (76mm x 283mm x 254mm)
XA275
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms	75 Watts per channel RMS, < 0.5% THD
(2 ohms)	100 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged	200 Watts per channel RMS, < 0.8% THD
Dimensions	3" x 11.125" x 8.375" (76mm x 283mm x 213mm)
XA250
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms)	50 Watts per channel RMS, < 0.5% THD
(2 ohms)	75 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged	150 Watts per channel RMS, < 0.8% THD
Dimensions	3" x 11.125" x 8.375" (76mm x 283mm x 213mm)

Specifications subject to change without notice.

12

6236 XA2CH_E.p65 12 5/7/01, 2:07 PM