Unpacking, Shipping Content, Base Unit | Jet Tools DC-1100MK, DC-1100CK

Unpacking

The table below lists the shipping cartons that are included with the models of the DC-1100 Dust Collector.

1.Locate your particular model and verify that you have received all of the correct cartons.

2.Check contents of each carton against the ship- ping content listings on this and the following page.

3.Report any damage to your distributor.

4.Do not discard any shipping material until after the dust collector has been assembled and is running properly.

		Base Unit (SN 708636)	30M Filter Bag Kit (SN 708636F)	5M Filter Bag Kit (SN 708636MF)	Canister Filter Kit (SN 708639B)


	DC-1100BK	x	x
	DC-1100CK	x			x
	DC-1100MK	x		x
	Table – DC-1100 Dust Collector cartons
Hardware Bag for Base Unit			(SN DC1100-HP)

16 – M8 x 16 Hex Cap Screws (K)

22 – M8 Flat Washers (L)

8 – M6 x 12 Pan Head Flange Screws (M) 6 – M8 Hex Nuts (N)

Base Unit Hardware

(SN 708636)

1 – Housing (A)

2 – Hose Clamps (B)

1 – Hose (C)

1 – Impeller (Motor/Fan Assembly) (D)

1 – Inlet Port (E)

1 – Impeller Cover (F)

3 – Support Legs (G)

1 – Base (H)

4 – Casters (J)

1 – Cone (K)

1 – Support Bracket (L)

1 – Owner's Manual (not shown)

1 – Warranty Card (not shown)

1 – Hardware Bag, Base Unit (SN DC1100-HP)

Base Machine Shipping Contents