Jet Tools JWBS-18X-3 operating instructions Introduction Specifications

Introduction

This manual is provided by Jet covering the safe operation and maintenance procedures for models JWBS-18X and JWBS-18X-3 Band Saws. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model Number		JWBS-18X	........................................... JWBS-18X-3
Stock Number		710750	.................................................... 710751
Cutting Capacity (height) (in.)		12	............................................................ 12
Cutting Capacity (width) (in.)		18-3/8	......................................................18-3/8
Maximum Rip Left of Blade w/Fence (in.)		16-1/2	......................................................16-1/2
Maximum Rip Right of Blade w/Fence (in.)		7-5/8	........................................................7-5/8
Blade Length (in.)		137	.......................................................... 137
Blade Speed (SFPM)		3000	........................................................ 3000
Minimum Blade Width (in.)		1/8	........................................................... 1/8
Maximum Blade Width (in.)		1-1/2	........................................................1-1/2
Table Size (in.)		19” x 19”	..................................................19” x 19”
Table Tilt (degrees)		45°R to 10°L	............................................45°R to 10°L
Table Height from Floor (in.)		37-1/2	......................................................37-1/2
Wheel Diameter (in.)		18-5/8	......................................................18-5/8
Dust Chute Diameter (in.)		4	.............................................................. 4
Overall Dimensions (HxWxD) (in.)		73 x 39 x 32-1/2	............................................ 73 x 39 x 35
Motor	1.75 HP, 1Ph, 115/230V (prewired 115V)		..................................... 3 HP, 1Ph, 230V
Net Weight (approx.) (lbs.)		418	.......................................................... 425
Shipping Weight (approx.) (lbs.)		493	......................................................... 500

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6