Unpacking
Contents of Shipping Container
1Band Saw
1Table
1Fence and Rail Assembly
1Resaw Guide and Knob
1Miter Gauge
1Owner’s Manual
1Warranty Card
1Accessory Package Contains: Hardware Bag
2 Knobs
1 Handle
1 10/12mm Wrench Fence Hardware Bag 4 Hex Cap Screws 4 Flat Washers
4 Lock Washers Rail Hardware Bag 9 Hex Cap Screws 9 Flat Washers
9 Lock Washers
1.Remove the crate and packing material from the band saw except for the transport skid on the bottom.
2.Move the saw to its permanent working location. The site should be dry, well lit, and have enough room to handle long stock and the service and/or adjustment of the machine from any side.
3.Move the band saw off the skid.
4.Clean all rust protected surfaces with a mild solvent or diesel fuel and a soft cloth. Do not use lacquer thinner, paint thinner, or gasoline. These will damage painted surfaces.
Tools Included for Assembly
1. 10/12mm Open End Wrench
Tools Required for Assembly & Adjustments
2. 14mm Open End Wrench
1. Cross Point Screw Driver
1. Combination Square
9