23.Test each set-up by revolving the work by hand to insure it clears the tool rest and bed. Check the setup at the lowest speed before increasing it to the operating speed.

24.Use the correct cutting tool for the operation to be performed and keep all tools sharp.

25.Use low speeds for roughing and for long or large diameter work. If vibration occurs, stop the machine and correct the cause. See the speed recommendation chart below:

Diameter of Work

Roughing RPM

General Cutting RPM

Finishing RPM

 

 

 

 

Under 2"

1500

3000

3000

 

 

 

 

2 to 4"

600

1500

2300

 

 

 

 

4 to 6"

450

1100

1500

 

 

 

 

6 to 8"

450

600

1100

 

 

 

 

8 to 10"

450

600

850

 

 

 

 

10 to 12"

450

600

850

 

 

 

 

12 to 14"

450

450

600

 

 

 

 

Speed Recommendations

26.When sanding, remove the tool rest from the machine, apply light pressure and use a slow speed to avoid heat build up.

27.When turning large diameter pieces, such as bowls, always operate the lathe at low speeds. See the speed recommendation chart.

28.Do not attempt to engage the spindle lock pin until the spindle has stopped. If leaving the machine area, turn it off and wait until the spindle stops before departing.

29.Make no adjustments except speed changes with the spindle rotating and always disconnect the machine from the power source when performing maintenance to avoid accidental starting or electrical shock.

30.Provide for adequate space surrounding work area and non-glare, overhead lighting.

31.When stopping the lathe, never grab the part or faceplate to slow it down. Let the work coast to a stop.

32.Use only JET factory authorized replacement parts and accessories; otherwise, the warranty and guarantee are null and void.

33.Do not use this JET wood lathe for other than its intended purpose. If used for other purposes, Walter Meier (Manufacturing) Inc., disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

5

Page 4 Page 6
Page 5
Image 5
Jet Tools JWL-1442VS operating instructions Speed Recommendations
Page 4 Page 6

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents