Beads

1.Place the parting tool on the tool rest and move the tool forward to make the full bevel of the tool contact the workpiece. Gently raise handle to make cut to the appropriate depth.

2.Repeat for other side of the bead.

3.Using a small skew or spindle gouge, start in the center between the two cuts and cut down each side to form the bead. Roll the tool in direction of cut.

Parting

Place parting tool on tool rest and raise the handle until it starts to cut and continue to cut to the desired depth.

If the cut is deep a clearance cut should be made alongside the first cut to prevent the tool tip from burning.

Coves

1.Use a spindle gouge. With the flute of the tool at 90 degrees to the workpiece, touch the center of the cutting edge to the workpiece and roll in towards the bottom of the cove. Stop at the bottom; attempting to go up the opposite side may cause the tool to catch.

2.Move the tool over the desired width of the cove.

3.With the flute facing the opposite direction, repeat step 1 for other side of cove. Stop at bottom of cut.

“V” Cuts

1.Use the long point of the skew. Note: Do not press the long point of the skew directly into the workpiece to create the "V"; this will result in a burned or burnished "V" with fibers being rolled up at both sides.

2.Lightly mark the center of the "V" with the tip of the skew.

3.Move the point of the skew to the right half of the desired width of your cut.

4.With the bevel parallel to the right side of the cut, raise the handle and push the tool in to the desired depth.

5.Repeat from the left side. The two cuts should meet at the bottom and leave a clean "V" cut.

6.Additional cuts may be taken to add to either the depth or width of the cut.

Figure 16

Figure 17

Figure 18

14

Page 13 Page 15
Page 14
Image 14
Jet Tools JWL-1442VS operating instructions Beads, Parting, Coves, Cuts
Page 13 Page 15

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents