Troubleshooting

Problem

Excessive Vibration.

Motor or Spindle Stalls or Will not Start

Motor fails to develop full power.

Tools tend to grab or dig in.

Tailstock Moves

When Applying

Pressure

 

Possible Cause

 

Solution

 

 

 

 

 

 

 

 

1.

Workpiece warped, out of round, has

1.

Correct problem by planing,

 

major flaw, improperly prepared for

 

bandsawing, reduce the RPM,

 

turning, or RPM is set too high

 

or scrap workpiece all together

2.

Worn spindle bearings

2.

Replace bearings

3.

Worn belt

3.

Replace belt

4.

Motor mount bolts loose

4.

Tighten bolts

5.

Lathe on uneven surface

5.

Shim lathe bed, or adjust feet

 

 

 

on stand

1.

Excessive cut

1.

Reduce cut depth

2.

Worn motor

2.

Replace motor

3.

Broken belt

3.

Replace belt

4.

Worn spindle bearings

4.

Replace bearings

5.

Improper cooling on motor

5.

Clean sawdust from motor fan

6.

Starting or running capacitor is bad

6.

Replace the starting capacitor

7.

Centrifugal switch bad

7.

Replace centrifugal switch

1.

Power line overloaded

1.

Correct overload condition

2.

Undersize wires in supply system, or

2.

Increase supply wire size

 

extension cord is too long

 

 

3.

Low voltage

3.

Request voltage check from

 

 

 

power company and correct

 

 

 

low voltage condition

4.

Running capacitor is bad

4.

Replace running capacitor

5.

Worn motor

5.

Replace motor

1.

Dull tools

1.

Sharpen tools

2.

Tool support set too low

2.

Reposition tool support height

3.

Tool support set too far from workpiece

3.

Reposition tool support closer

 

 

 

to workpiece

4.

Improper tool being used

4.

Use correct tool for operation

1.

Excessive pressure being applied by

1.

Slide tailstock down to the right

 

tailstock. Note: The screw action of

 

side of the lathe against the

 

the tailstock is capable of applying

 

stop. Move headstock into

 

excessive pressure to workpiece and

 

position and apply pressure to

 

headstock. Apply only sufficient force

 

workpiece with tailstock.

 

by tailstock to hold workpiece securely

 

 

 

in place. Excessive pressure can

 

 

 

cause damage to machine.

 

 

2.

Lathe bed and tailstock mating

2.

Remove and clean surfaces

 

surfaces are greasy or oily.

 

with a cleaner degreaser

Parts

Ordering Replacement Parts

To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

21

Page 20 Page 22
Page 21
Image 21
Jet Tools JWL-1442VS operating instructions Troubleshooting, Ordering Replacement Parts
Page 20 Page 22

JWL-1442VS specifications

The Jet Tools JWL-1442VS is a robust wood lathe designed for both novice and experienced woodturners. Known for its versatility and reliability, it has become a go-to choice for many who seek to create intricate designs. This lathe combines advanced technology with user-friendly features, making it suitable for crafting everything from simple spindle work to complex bowls and detailed ornaments.

One of the standout features of the JWL-1442VS is its variable speed control, allowing users to adjust the speed from 40 to 3200 RPM. This range provides the flexibility needed for different turning projects, ensuring optimal performance for both roughing and finishing tasks. The digital readout on the control panel displays the current speed, making it easy for users to monitor and adjust as needed.

Another notable characteristic is its 14-inch swing over the bed and 42 inches between centers. This generous capacity enables woodturners to work with larger pieces of stock while maintaining precision and stability. The sturdy cast iron construction of the lathe adds to its durability, absorbing vibrations and providing a solid base for safe operation.

The JWL-1442VS also features a sliding headstock, which enhances accessibility and allows for outboard turning. This capability is particularly beneficial when working on larger bowls or wide pieces, as it provides additional room and maneuverability. The tailstock features a convenient lockable design that promotes secure positioning and easy adjustments.

In addition to its mechanical advantages, this wood lathe is equipped with Jet's innovative quick-release spindle lock. This feature enables users to quickly change out chucks and accessories, reducing downtime and increasing productivity. The machine’s ease of use is complemented by its user-friendly controls and intuitive design.

Safety is also a priority with the JWL-1442VS, featuring a built-in safety switch that helps prevent accidental starts. This attention to safety ensures that woodturners can focus on their craft without unnecessary concerns.

In conclusion, the Jet Tools JWL-1442VS is a versatile and powerful wood lathe that caters to a wide range of turning needs. With its advanced variable speed control, robust construction, and thoughtful features, it stands out as an excellent choice for anyone looking to elevate their woodturning experience. Whether you are a beginner or a seasoned pro, the JWL-1442VS promises to deliver performance and reliability for countless turning projects.
Top Page Image Contents