38
NON-WIZARD directions:
A. Select 'Windows default driver', A "New Hardware
Found" dialog box will request a driver location.
B. Select 'Yes' to restart the system when prompted to
do so.
Step C may happen several times.
UPDATE DEVICE DRIVER WIZARD directions:
A. Select 'Next', A Wizard dialog box requests to
search for drivers.
B. Select 'Finish', The Wizard dialog box will indicate it
found a driver in the <Windows 95* directory>\INF
directory.
C. Select 'Yes' to restart the system when prompted to
do so. Step C may happen several times.
D. Go to step 4, De-Installation process is complete.
4. De-Install process is complete.
****************************************************************************
6. TROUBLESHOOTING
****************************************************************************
The following procedure assumes that the hardware/software
requirements from above have been satisfied. The following
procedure also assumes that the installation of the driver was
performed as described in the 'Verifying Installation of the Driver'
section. Refer to the 'Release Notes' section of the document for
additional information.
COMMON PROBLEMS:
****************************
1. The device is incompatible with PCI Bus Master IDE operation.
This is due to the fact that the device does not work properly
when