45
Q4> One or more of the IDE/ATAPI drives on the system fail to
perform correctly and/or is not recognized by the driver.
A4> Ensure devices on the system are connected according to the
manufacturers' documentation. Please make sure that you
don't have any non-supported IDE devices or applications
installed on the system. Please refer to the release note
for supported devices and applications.
If the system fails to operate reliably, de-install the driver.
Q5> The CD-ROM drive fails to perform correctly after the driver
has been installed (e.g. audio CD-ROMs or some advanced CD-
ROM applications don't operate correctly).
A5> Please ensure that ONLY supported IDE devices or
applications are installed on the system. Please refer to the
release note for supported devices and applications.
A conflict between the PIIX Bus Master IDE driver and a
DOS real-mode ATAPI CD-ROM device driver may have
occurred. This conflict occurs when both the real-mode driver
and the PIIX Bus Master IDE driver attempt to access the
resources of the PIIX controller. If the drive fails to operate
in the case that there is NO real-mode driver for the device is
installed, de-install the driver.
If the system fails to operate reliably, de-install the driver.
Q6> The driver does not support the following CD-ROM drives.
Gallant GCD-R542B
Mitsumi FX400
Torisan S1G
Torisan C3G
Toshiba XM-5302B
Wearnes CDD-220
Wearnes CDD-620
Wearnes CDD-820