33
03/28/97 12:00a 6,128 _SETUP.DLL
03/28/97 12:00a 179,689 _SETUP.LIB
****************************************************************************
3. INSTALLING THE SOFTWARE
****************************************************************************
This installation procedure is specific only to the version of the driver
and installation file included in this package.
This subsection describes how to install the software on a system
where Windows 95* is installed.
NOTE: Record the location of the Windows 95* directory before
installing the driver.
1. Check the System Requirements. Windows 95* must be fully
installed and running on the system prior to running this
software.
2. Close any running applications.
3. Remove references to installed real-mode IDE device drivers in
the AUTOEXEC.BAT and CONFIG.SYS files (especially any
drivers that control ATAPI CD-ROM and special IDE features).
Use the Notepad utility to do this.
4. The driver files are stored in an integrated application setup
program. This program is a Windows 95* program that allows the
driver files to be INSTALLED or DE-INSTALLED.
Execute the driver setup program.
Run SETUP.EXE.
5. Click 'Next' on Welcome Screen to read and agree to the license
agreement. View the text file and choose File\Exit to close
Notepad and continue. NOTE: If you click 'No', program will
terminate.