Pulleys and Belts

The belt and pulley assembly are on the left side of the planer. To inspect for pulley alignment and correct belt tension, remove the four hex head screws (10mm) holding the cover in place. Figure 9 shows the assembly with the cover removed.

Pulley Alignment

1.Place the edge of a metal ruler so it rests perpendicular against the flat sides of the motor and cutterhead pulleys (Fig. 11).

If the pulleys lie in straight plane (Fig. 11) they are aligned.

Figure 9

If the pulleys need to be aligned:

2.Loosen four bolts (12mm) on the motor mounting base plate (Fig. 10), which will allow the motor to move from side-to-side.

Figure 10

3.Adjust the motor until the pulleys are in the aligned position as shown in Figure 11.

4.Re-tighten all bolts.

Figure 11

Belt Tension

Check the belt tension by squeezing the belts together in the middle (between the motor and cutterhead pulleys as shown in Fig. 12) with moderate pressure. Proper tension is indicated when there is approximately 1/4” deflection.

Figure 12

To adjust the belt tension:

1.Loosen the two 17mm bolts (A, Fig. 13) that hold the motor/pulley assembly to the planer.

2.Using a lever, raise the motor to increase the belt tension.

Note: Belts will rarely be too tight. Adjustment typically requires belt tightening.

3.Tighten the bolts and check the belt tension again.

4.Verify that the pulleys are still in alignment.

12

Page 11 Page 13
Page 12
Image 12
Jet Tools JWP-16OS owner manual Pulleys and Belts, Pulley Alignment, Belt Tension
Page 11 Page 13

JWP-16OS specifications

The Jet Tools JWP-16OS is a high-performance woodworking planer designed for both professionals and hobbyists seeking precision and efficiency in their projects. This machine is notable for its robust construction and advanced features that facilitate smooth and accurate planing of wood surfaces.

One of the standout characteristics of the JWP-16OS is its powerful 3-horsepower motor, which delivers ample torque to handle even the most challenging wood species. This motor, paired with a six-knife cutter head, ensures a clean and finished surface while reducing the need for excessive sanding post-planing. The six knives provide a finer cut and smoother finish, making this planer suitable for a variety of woodworking applications.

Another significant feature is the proprietary Jet Air Systems technology that maintains a quiet operation, making the JWP-16OS suitable for any workspace without excessive noise. This technology minimizes vibration, further enhancing the overall precision and longevity of the machine. Additionally, the machine comes equipped with a built-in dust port, allowing for cleaner operation by connecting to a dust collection system, ensuring that your work environment remains as tidy as your finished projects.

The JWP-16OS also showcases an easily adjustable infeed and outfeed table, which provides extended support for larger workpieces. This feature greatly enhances the user’s ability to work with larger boards, contributing to an efficient workflow and minimized risk of material snags or defects. The combined table length of 84 inches aids in maintaining stability during operation.

Safety features are also a priority in the design of the JWP-16OS. It includes a safety disconnect switch to prevent accidental startups, ensuring that the machine is safe to operate at all times. The machine is engineered with user-friendly controls, allowing even novice woodworkers to operate it effectively with minimal learning curve.

In summary, the Jet Tools JWP-16OS is a powerful, feature-rich planer that delivers precision, efficiency, and safety. Its robust motor, advanced cutter head technology, quiet operation, and user-friendly design make it an excellent addition to any workshop. Whether for professional use or hobbyist endeavors, the JWP-16OS stands out as a reliable tool for achieving high-quality woodworking results.
Top Page Image Contents