C2-600 Specifications:

Woofer: Injection-molded, Mica-filled, Polypropylene Cone, Butyl Rubber Surround, 1 in. Voice Coil on Kapton® Former, Flat, Symmetrical Roll Spider, Ferrite Magnet

Tweeter: 0.75 in. (19 mm) Silk Dome, Ferrofluid Cooling / Damping, Neodymium Magnet

Crossover Networks: 1st Order Low-Pass Filter, 2nd Order High-Pass Filter, 3-Position Adjustable Tweeter Level, Premium Mylar® Capacitors Premium Air-Core Inductors

Continuous Power Handling: 60 Watts

Recommended Amp Power: 15-100 Watts per channel (RMS)

Efficiency: 90.5 dB @ 1W/1m 96.5 dB @ 1W/0.5m

Sensitivity: 93.5 dB @ 2.83V/1m

Nominal Impedance: 4 ohm

Frequency Response: 59 Hz - 22 KHz ± 3 dB

Included Components and Parts:

Two C2-600cw 6-inch (165 mm) Woofers

Two C2-075ct 0.75-inch (19 mm) Tweeters

Two C2-600-XO Crossover Networks

Two Flush-Mount Tweeter Fixtures

Two Surface-Mount Tweeter Fixtures

Two Metal Spring Clips for Tweeter Fixtures

Two Grille Assemblies

Two Self-Adhesive JL Audio Nameplates for Grilles

Twelve #8 x 1.2 inch (30 mm) Sheet Metal Screws

Four #6 x 1-inch (25 mm) Sheet Metal Screws

Two 1.18-inch (30 mm) Machine Screws

Eight Mounting Clips for Woofer Mounting

Two 4.7 mm Female Crimpable Connectors

Two 2.8 mm Female Crimpable Connectors

Two 4.7 Male Crimpable Connectors

Two 2.8 mm Male Crimpable Connectors

Twelve Crimpable Spade Connectors

GETTING STARTED

•Turn off the audio system. It is also advisable to disconnect the negative (–) terminal of your vehicle’s battery whenever performing installation work.

•Before cutting, drilling or inserting any screw, check clearances on both sides of the planned mounting surface. Also check for any potential obstacles, such as window tracks and motors, wiring harnesses, etc. Check both sides of the

vehicle, many vehicles are not symmetrical!

•Always wear protective eyewear.

SPEAKER PLACEMENT CONSIDERATIONS

In most cases, your speakers will be placed into factory speaker locations. If you have some speaker mounting flexibility, keep the following in mind:

Lower mounting locations, such as the lower front corner of a door or a kick-panel provide the greatest path length distances for the sound emitted by the speakers. For this reason, they are generally more desirable than higher mounting locations. Higher mounting locations will usually result in extreme near-side soundstage bias which compromises the stereo listening experience.

Due to ongoing product development, all specifications are subject to change without notice.

3

Page 3
Image 3
JL Audio C2-600-02102009, C2-600-XO, C2-600cw owner manual Getting Started, Speaker Placement Considerations

C2-600, C2-600-02102009, C2-600cw, C2-600-XO specifications

JL Audio is renowned for their high-performance audio equipment, and the C2 series of speakers is a testament to their commitment to quality sound. The C2-600cw, C2-600-XO, and C2-600-02102009 models are particularly noteworthy, showcasing a combination of advanced technologies and impressive specifications.

The C2-600cw is a 6.5-inch component subwoofer designed for those who seek rich, deep bass response. Its Polypropylene cone is both lightweight and rigid, ensuring optimal audio output without sacrificing clarity. The rubber surround provides added durability while also helping the subwoofer produce powerful low frequencies. Its voice coil design allows for efficient heat dissipation, enhancing performance during extended use.

The C2-600-XO is a passive crossover designed to complement the C2 series speakers. This essential component ensures that sound frequencies are directed to the appropriate drivers, thereby enhancing the overall soundstage. Constructed with high-quality materials, the C2-600-XO minimizes distortion and maximizes the efficiency of the audio system. Its design incorporates low-pass and high-pass filters to achieve a smooth transition between frequencies, making it an invaluable addition for enthusiasts aiming for precise audio reproduction.

The C2-600-02102009 model is an innovative edition within the C2 series, showcasing JL Audio’s commitment to continuous improvement and technology integration. This model features enhanced sensitivity, allowing it to produce robust sound even with lower-power amplifiers. Additionally, it employs a high-temperature voice coil and advanced cooling systems to ensure performance consistency under demanding conditions.

Across the C2 series, you'll find features such as impressive power handling and frequency response ranges. The line is engineered with a focus on sound accuracy, which allows listeners to experience the intricate nuances of their favorite music. Furthermore, installation versatility makes these models suitable for a variety of vehicles and audio setups.

In summary, the JL Audio C2 series—including the C2-600cw, C2-600-XO, and C2-600-02102009—exemplifies cutting-edge audio technology and design. Each model contributes to a dynamic, enriched listening experience, making them an excellent choice for car audio enthusiasts and audiophiles alike. The combination of robust construction and advanced acoustics ensures that these speakers not only sound exceptional but also stand the test of time in performance and reliability.