JL Audio SB-GM-SLVCRW/10W1v2

SB-GM-SLVCRW/10W1v2_INSTR_SKU#011173



STEALTHBOX WALL

VEHICLE SHEET METAL 

THREADED INSERT

LOCK WASHER

FLAT WASHER

SOCKET CUP SET SCREW

HEX NUT



FENDER WASHER

CONGRATULATIONS

You have completed the installation for this model!

Please go back in the instructions in reverse to mount all

factory paneling back to it's original form.

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T e P 2 2

From inside the truck, position the Stealthbox® into the

mounting location. From the outside of the truck(between

the cab wall and the bed wall) place the supplied fender

washer, flat washer, lock washer and then nut onto each

exposed socket cup set screw. Use a long 3/8" open end

wrench or ratcheting box end to secure the mounting

hardware. If you have big hands and arms, time to get that

smaller friend of yours to help out.

Note: For added prote ction it is reco mmended that

you apply a bead of s ilicone between t he vehicle and

the fender washer. Af ter the bolt ass embly is tightl y

secured, it is also recommended that vehicle under-

coating material is applied to the e xposed assembly.

S T e P 2 1

1500 Series Trucks

Thread in the pair of socket cup set screws into the back of

the Stealthbox®, leaving 1-1/2" of the threads exposed.

HD Series Trucks

Back out the pair of socket cup set screws,

leaving 1-1/2" of the threads exposed.

S T e P 2 0

If an amplifier is to be mounted onto the

Stealthbox®.

Drill the mounting holes in the proper location. Apply

silicone to the four supplied Phillip head screws before

securing the amplifier.

Run speaker wire from the amplifier location to the speaker

terminals. Attach the speaker wire to the terminals.

Double check the woofers for proper operation.

Page 3 • JL Audio, Inc 2006

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign

patents pending. For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

www.jlaudio.com

10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

I N C LU D e D H A R D W A R e

(4) #10 x 3/4 Phillip pan head sheet metal screws (2) 3/8" - 16 x 2-1/4" Socket Cup Set Screw

(2) 3/8" Split Lock Washer (2) 3" x 3" Wax Squares

(2) 3/8" Flat Washer

(2) 3/8" x 1-1/4” Fender Washer

P O W eR R e C O M M e N DA TI O N

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 10W1v2-4

Nominal Impedance: 2 ohms mono

Continuous Power Handling: 300 Watts

P O W eR R e C O M M e N DA TI O N

JL Audio recommends using a high quality amplifier such as the JL Audio 250/1.

The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1 when

being used to power your Stealthbox®.

JL AUDIO 250/1

monoblock subwoofer amplifier

Amplifier Input Section

Input Sens.

Input Voltage

Low/High

Left Ch. Right Ch.

Signal Sensing

Off/On

Output Mode

Full-Range/Low-Pass/High-Pass

Left Ch. Right Ch.

Amp LP Filter

Mode/Slope

Off/12dB/24dB

Filter Freq. (Hz)

Bass Control

LF Boost (dB)

Off/30Hz

Infrasonic Filter

+1 +13

+10

Preamp Output Section

+12VDC Ground Remote

The JL Audio 250/1 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D /H I G H F R e q U e N C Y D R I v eR F I T M e N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6.5-inch / Front Doors

Fits JL Audio Models: TR650-CSi, TR650-CXi, C2-650, C2-650x, C3-650, C5-650, C5-650x & ZR650-CSi

Rear Speaker Size / Location: 6.5-inch / Rear Doors

Fits JL Audio Models: TR650-CXi, C2-650x, C3-650, C5-650x