REMOVAL OF GRILLE
Removing the Grille
If the grille is already installed, remove it by using a bent paper clip or the tip of a corkscrew and pulling it away from the frame. See Figure 4.
Figure 4
PAINTING THE GRILLE
AND FRAME
Painting the Speaker Frame
The speakers must be removed prior to painting the frames.
Painting the Grilles:
The grilles should be painted before they are installed on the speakers. The best results will be obtained by using a spray gun or airless sprayer. Thin the paint, and then apply several light coats. This technique helps prevent clogging of grille holes. Paint both sides of the grille to cover all the white paint.
OPERATION
Listening at Higher Volumes:
Listening at Higher Volumes:
It requires more power to achieve a reasonable volume of sound in a large room than it does in a small room. It is possible to turn the volume so high that the amplifier runs out of power. This creates “clipping” distortion.
Clipping distortion makes treble sound very harsh and unmusical. When you hear harsh sounding treble from any good speaker, turn the volume down immediately! You are much less likely to damage a speaker with a large amplifier less likely to produce any clipping distortion.
6
