Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indica- tor h .
3Residual heat can be used for melting and keeping food warm.
Switching the appliance on and off
|
| Control panel | Display |
|
|
|
|
Switch on | Touch | for 2 seconds | ¾ / Decimal point flashes |
|
|
|
|
Switch off | Touch | for 1 second | h / none |
|
|
|
|
Selecting the cooking zone
Select
Control panel | Display |
Touch | ¾ Decimal point illuminates |
|
|
3The decimal point is displayed by the selected cook- ing zone. Then a heat setting must be set for this cooking zone within 6 seconds, otherwise it must be
Selecting the heat setting
3After selecting the cooking zone, briefly release the sensor field .
|
|
| Control panel | Display |
|
|
|
|
|
Increase | Touch |
|
| ¾ to Ç |
|
|
|
|
|
Decrease | Touch |
|
| Ç to ¾ |
|
|
|
|
|
Switch off | Touch | and | at the same time | ¾ |
|
|
|
|
|
3After 6 seconds with no input the selection is can- celled and the decimal point goes out. To set the re- quired cooking zone again, make another selection.
10